[GIT PULL 3/5] ARM: imx: device tree changes for 3.12
Shawn Guo
shawn.guo at linaro.org
Sun Aug 18 09:48:06 EDT 2013
Olof, Kevin,
The pull request depends on the previous one imx-soc-3.12. Please take
care of it. Thanks.
Shawn
The following changes since commit 130ef23a4b3bf9e564a6d000c096e9cb50f2e5c5:
Merge tag 'imx-soc-3.12' into imx/dt (2013-08-18 16:30:14 +0800)
are available in the git repository at:
git://git.linaro.org/people/shawnguo/linux-2.6.git tags/imx-dt-3.12
for you to fetch changes up to 63f4b28640da45ecae5bfacfe0d2a12c71a25c56:
ARM: dts: vf610-twr: enable i2c0 device (2013-08-18 16:33:05 +0800)
----------------------------------------------------------------
It contains the imx device tree updates for 3.12.
- New pinctrl entry additions for various peripherals
- Devices enabling for imx6, imx5 and imx27 boards
- Add missing device nodes like iim, owire, audmux and sram, etc.
- Various updates on boards like phytec, wandboard and sabresd
- Consolidate pad macros between imx6q and imx6dl
----------------------------------------------------------------
Alexander Shiyan (25):
ARM: dts: imx27: Add SAHARA2 devicetree node
ARM: dts: imx27: Add AUDMUX devicetree node
ARM: dts: imx27: Rename PWM devicetree node
ARM: dts: imx27: Sort entries by address
ARM: dts: imx27-phytec-phycore-som: Define minimal memory layout
ARM: dts: imx27: Add kpp devicetree node
ARM: dts: i.MX27: Move IIM node under AIPI2 bus
ARM: dts: i.MX27: Add WEIM node
ARM: dts: imx27-phytec-phycore-som: Add WEIM node
ARM: dts: imx27-phytec-phycore-som: Add SRAM node
ARM: dts: imx27-phytec-phycore-rdk: Add CAN node
ARM: dts: imx27-phytec-phycore-som: Using labels for reusing UART, I2C and FEC
ARM: dts: i.MX51: Add WEIM node
ARM: dts: imx27: Add core voltages
ARM: dts: i.MX27: Using "wdog_ipg_gate" clock source for watchdog
ARM: dts: i.MX27: Remove optional "ptp" clock source for FEC
ARM: dts: i.MX27: Add label to CPU node
ARM: dts: i.MX27: Increase "clock-latency" value
ARM: dts: i.MX27: Remove clock name from CPU node
ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
ARM: dts: i.MX27: Disable AUDMUX in the template
ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
ARM: dts: i.MX51: Add one more I2C2 pinmux entry
Fabio Estevam (13):
ARM: imx27: Use 'AITC' for the interrupt controller name
ARM: dts: mx53qsb: Enable VPU support
ARM: dts: imx6dl-wandboard: Add audio support
ARM: dts: imx: Add the missing cpus node
ARM: dts: imx6qdl.dtsi: Add usdhc1 pin groups
ARM: dts: imx6qdl.dtsi: Add another uart3 pin group
ARM: dts: imx6dl-wandboard: Add SDHC1 and SDHC2 ports
ARM: dts: imx6dl-wandboard: Add support for UART3
ARM: dts: imx6: Add support for imx6q wandboard
ARM: dts: imx6q-wandboard: Add sata support
ARM: dts: imx6qdl-sabresd: Allow buttons to wake-up the system
ARM: dts: imx6qdl-sabresd: Add touchscreen support
ARM: dts: imx53-qsb: Make USBH1 functional
Huang Shijie (10):
ARM: dts: imx6dl: add a new pinctrl for ecspi1
ARM: dts: imx6q: add a new pinctrl for ecspi1
ARM: dts: imx6qdl-sabresd: enable the SPI NOR
ARM: dts: imx: add #dma-cells property for sdma
ARM: dts: imx6sl: add "fsl,imx6q-uart" for uart compatible
ARM: dts: imx6q{dl}: add DTE pads for uart
ARM: dts: imx6q{dl}: add a DTE uart pinctrl for uart2
ARM: dts: enable the uart2 for imx6q-arm2
ARM: dts: imx6qdl: add a new pinctrl for uart3
ARM: dts: imx6qdl/imx6sl: add the dma property for uart
Jingchang Lu (1):
ARM: dts: vf610-twr: enable i2c0 device
Markus Pargmann (8):
ARM: dts: imx27: Add imx framebuffer device
ARM: dts: imx27: Add 1-wire
ARM: dts: imx27 cpufreq-cpu0 frequencies
ARM: dts: Add device tree support for phycard pca100
ARM: dts: imx27 phyCARD-S remove wrong I2C RTC
ARM: dts: imx27 phyCARD-S SOM remove wrong i2c sensor
ARM: dts: imx27 phyCARD-S, move i2c1 and owire to rdk
ARM: dts: imx27 phyCARD-S, i2c ADC device node
Matthias Weisser (1):
ARM: dts: imx25: Make lcdc compatible to imx21 fb
Peter Chen (2):
ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
Philipp Zabel (4):
ARM: dts: add sram for imx53 and imx6q
ARM i.MX6DL: dts: add clock and mux configuration for LDB
ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
Philippe Reynes (1):
ARM: apf27dev: add rtc ds1374 to the device tree
Richard Zhu (1):
ARM: dtsi: enable ahci sata on imx6q platforms
Sascha Hauer (16):
ARM: dts: i.MX6: sync imx6q and imx6dl pinmux entries
ARM: dts: i.MX6qdl: Add compatible and clock to flexcan nodes
ARM: dts: i.MX6qdl: Add i.MX31 compatible to gpt node
ARM: dts: i.MX27: Add iim node
ARM: dts: i.MX31: Add iim node
ARM: dts: i.MX25: Add iim node
ARM: dts: i.MX51: Add iim node
ARM: dts: i.MX53: Add iim node
ARM: dts: i.MX25: Add i2c and spi aliases
ARM: dts: i.MX27: Add i2c aliases
ARM: dts: i.MX51: Add i2c and spi aliases
ARM: dts: i.MX53: Add i2c and spi aliases
ARM: dts: i.MX6: Add i2c and spi aliases
ARM: dts: i.MX51: move kpp pinmux entry
ARM: dts: i.MX51 babbage: Add spi-cs-high property to pmic
ARM: dts: i.MX51: Add USB host1/2 pinmux entries
Shawn Guo (9):
ARM: dts: imx: share pad macro names between imx6q and imx6dl
ARM: dts: add more imx6q/dl pin groups
ARM: dts: imx: remove old DMA binding data from gpmi node
ARM: dts: imx: add tempmon node for imx6q thermal support
ARM: dts: imx: add LVDS panel for imx6qdl-sabresd
ARM: dts: imx: use generic DMA bindings for SSI nodes
ARM: imx6q: remove board specific CLKO setup
ARM: dts: imx: ocram size is different between imx6q and imx6dl
ARM: imx: add ocram clock for imx53
Tony Prisk (1):
ARM: dts: wandboard: Add support for SDIO bcm4329
.../devicetree/bindings/clock/imx5-clock.txt | 1 +
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/imx25.dtsi | 35 +-
arch/arm/boot/dts/imx27-apf27dev.dts | 5 +
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 93 +
arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts | 44 +
arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 13 +
arch/arm/boot/dts/imx27-phytec-phycore-som.dts | 125 +-
arch/arm/boot/dts/imx27.dtsi | 120 +-
arch/arm/boot/dts/imx31.dtsi | 17 +
arch/arm/boot/dts/imx51-apf51.dts | 4 -
arch/arm/boot/dts/imx51-babbage.dts | 5 +
arch/arm/boot/dts/imx51.dtsi | 632 +++---
arch/arm/boot/dts/imx53-qsb.dts | 18 +-
arch/arm/boot/dts/imx53.dtsi | 56 +-
arch/arm/boot/dts/imx6dl-pinfunc.h | 2138 ++++++++++----------
arch/arm/boot/dts/imx6dl-sabreauto.dts | 22 -
arch/arm/boot/dts/imx6dl-sabresd.dts | 19 -
arch/arm/boot/dts/imx6dl-wandboard.dts | 24 +-
arch/arm/boot/dts/imx6dl.dtsi | 254 +--
arch/arm/boot/dts/imx6q-arm2.dts | 14 +-
arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi | 112 +-
arch/arm/boot/dts/imx6q-pinfunc.h | 2050 +++++++++----------
arch/arm/boot/dts/imx6q-sabreauto.dts | 22 +-
arch/arm/boot/dts/imx6q-sabrelite.dts | 22 +-
arch/arm/boot/dts/imx6q-sabresd.dts | 19 +-
arch/arm/boot/dts/imx6q-wandboard.dts | 26 +
arch/arm/boot/dts/imx6q.dtsi | 393 +---
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 22 +
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 92 +-
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 137 ++
arch/arm/boot/dts/imx6qdl.dtsi | 770 ++++++-
arch/arm/boot/dts/imx6sl.dtsi | 35 +-
arch/arm/boot/dts/vf610-twr.dts | 7 +
arch/arm/mach-imx/clk-imx51-imx53.c | 3 +-
arch/arm/mach-imx/clk-imx6q.c | 11 +
arch/arm/mach-imx/mach-imx6q.c | 69 -
37 files changed, 4201 insertions(+), 3231 deletions(-)
create mode 100644 arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
create mode 100644 arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
create mode 100644 arch/arm/boot/dts/imx6q-wandboard.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-wandboard.dtsi
More information about the linux-arm-kernel
mailing list