[PATCHv4 2/3] ARM: socfpga: dts: Add support for SD/MMC

[Stephen Warren]

On 08/14/2013 10:48 AM, dinguyen at altera.com wrote:
> From: Dinh Nguyen <dinguyen at altera.com>
> 
> Add bindings for SD/MMC for SOCFPGA.

> diff --git a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt

> +* altr,sysmgr: Should be the phandle to the system_mgr node. As this is where
> +		this where the register that controls the CIU clock phases
> +		reside.

On the surface, this binding series seems OK, but I do have a question:
how is the sysmgr phandle used?

I assume there's some register in this syscon device that resets or
enables or otherwise controls this MSHC module. How does the code know
which register it is? The phandle in the altr,sysmgr property would
usually be followed by a/some cell(s) that encode this information, so
that the MSHC driver doesn't have to know anything about the layout of
the syscon registers, and so the sysconf driver doesn't have to know
anything about the identity of the MSHC client device.

That way, the MSHC driver will work fine if a HW designer has dropped
the MSHC IP block into a completely different SoC with a different
syscon register layout.