[PATCH 07/10] crypto: omap-aes: Add IRQ info and helper macros
Joel Fernandes
joelf at ti.com
Wed Aug 14 19:12:46 EDT 2013
Add IRQ information to pdata and helper macros. These are
required for PIO-mode support.
Signed-off-by: Joel Fernandes <joelf at ti.com>
---
drivers/crypto/omap-aes.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index 71da52b..c057eac 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -82,6 +82,10 @@
#define AES_REG_LENGTH_N(x) (0x54 + ((x) * 0x04))
+#define AES_REG_IRQ_STATUS(dd) ((dd)->pdata->irq_status_ofs)
+#define AES_REG_IRQ_ENABLE(dd) ((dd)->pdata->irq_enable_ofs)
+#define AES_REG_IRQ_DATA_IN BIT(1)
+#define AES_REG_IRQ_DATA_OUT BIT(2)
#define DEFAULT_TIMEOUT (5*HZ)
#define FLAGS_MODE_MASK 0x000f
@@ -127,6 +131,8 @@ struct omap_aes_pdata {
u32 data_ofs;
u32 rev_ofs;
u32 mask_ofs;
+ u32 irq_enable_ofs;
+ u32 irq_status_ofs;
u32 dma_enable_in;
u32 dma_enable_out;
@@ -846,6 +852,8 @@ static const struct omap_aes_pdata omap_aes_pdata_omap4 = {
.data_ofs = 0x60,
.rev_ofs = 0x80,
.mask_ofs = 0x84,
+ .irq_status_ofs = 0x8c,
+ .irq_enable_ofs = 0x90,
.dma_enable_in = BIT(5),
.dma_enable_out = BIT(6),
.major_mask = 0x0700,
--
1.7.9.5
More information about the linux-arm-kernel
mailing list