[PATCH v15 00/13] Add tested id switch and vbus connect detect support for Chipidea
Peter Chen
peter.chen at freescale.com
Tue Aug 13 19:43:04 EDT 2013
On Mon, Aug 12, 2013 at 09:22:46AM +0800, Peter Chen wrote:
> This patchset adds tested otg id switch function and vbus connect
> and disconnect detection for chipidea driver. And fix kinds of
> bugs found at chipidea drivers after enabling id and vbus detection.
>
> This patch are fully tested at imx6 sabresd and imx28evk platform by me.
> Besides, marek tested it on two STMP3780-based boards (not yet mainline)
> and two MX28-based boards.
>
> My chipidea repo: https://github.com/hzpeterchen/linux-usb.git
Hi Alex,
I see Felipe has already sent his pull request for 3.12 merge
windows. Would you please speed up review my chipidea patches?
At least, I hope this serial can be queued at 3.12. Thanks.
>
> Changes for v15:
> - Mark otgsc API as static line, and move them to otg.h [4/13]
> - Remove some redundant comments [6/13]
> - Fix some typos [8/13]
> - Retire flag CI_HDRC_PULLUP_ON_VBUS [12/13] [13/13]
>
> Changes for v14:
> - This patchset is based on below recent chipidea patches and newest
> usb-next, it can decrease rebase effort.
>
> Fabio Estevam (3):
> chipidea: ci_hdrc_imx: Remove unused variable 'res'
> chipidea: core: Move hw_phymode_configure() into probe
> chipidea: Remove previous MODULE_ALIAS
>
> Lothar Wabmann (3):
> usb: chipidea: improve kconfig 2.0
> usb: chipidea: don't clobber return value of ci_role_start()
> usb: chipidea: ci_hdrc_imx: remove an unsolicited module_put() call
> from ci_hdrc_imx_remove()
>
> Peter Chen (1):
> usb: chipidea: fix the build error with randconfig
>
> - [Michael comments]: move vbus operation to core, and squash two vbus
> patches. [1/12], [2/12]
> - [Michael comments]: move out non vbus and non id related patches. [14/14 at v13]
>
> Chagnes for v13:
> - Add Tested-by: Marek Vasut <marex at denx.de>
> - [Sascha's comments]: Add return value check for devm_regulator_get. [3/14]
> - [Marc's comments]: Change timeout usage at hw_wait_reg. [11/14]
> - [Alex's comments]: Using platdata flag to indicate dual role but not
> OTG controller. [7/14]
>
> Changes for v12:
> - Rebased greg's usb-next tree (3.10.0-rc7+)
> - Split more small patches for single function and fix.
>
> Peter Chen (12):
> usb: chipidea: move vbus regulator operation to core
> usb: chipidea: host: add vbus regulator control
> usb: chipidea: udc: otg_set_peripheral is useless for some chipidea
> users
> usb: chipidea: otg: Add otg file used to access otgsc
> usb: chipidea: Add role init and destory APIs
> usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG
> usb: chipidea: disable all interrupts and clear all interrupts status
> usb: chipidea: move otg relate things to otg file
> usb: chipidea: add vbus interrupt handler
> usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts
> usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and
> CI_HDRC_PULLUP_ON_VBUS
> usb: chipidea: udc: .pullup is valid when vbus is on at
> CI_HDRC_PULLUP_ON_VBUS
>
> Peter Chen (13):
> usb: chipidea: move vbus regulator operation to core
> usb: chipidea: host: add vbus regulator control
> usb: chipidea: udc: otg_set_peripheral is useless for some chipidea
> users
> usb: chipidea: otg: Add otg file used to access otgsc
> usb: chipidea: Add role init and destroy APIs
> usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG
> usb: chipidea: disable all interrupts and clear all interrupts status
> usb: chipidea: move otg related things to otg file
> usb: chipidea: add vbus interrupt handler
> usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts
> usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and
> CI_HDRC_PULLUP_ON_VBUS
> usb: chipidea: retire flag CI_HDRC_PULLUP_ON_VBUS
> usb: chipidea: udc: .pullup is valid only when vbus is there
>
> drivers/usb/chipidea/Makefile | 2 +-
> drivers/usb/chipidea/bits.h | 10 ++
> drivers/usb/chipidea/ci.h | 8 ++
> drivers/usb/chipidea/ci_hdrc_imx.c | 27 +-----
> drivers/usb/chipidea/ci_hdrc_msm.c | 1 -
> drivers/usb/chipidea/core.c | 183 +++++++++++++++++++++++++-----------
> drivers/usb/chipidea/host.c | 30 ++++++-
> drivers/usb/chipidea/host.h | 6 +
> drivers/usb/chipidea/otg.c | 120 +++++++++++++++++++++++
> drivers/usb/chipidea/otg.h | 35 +++++++
> drivers/usb/chipidea/udc.c | 78 ++++++++++------
> drivers/usb/chipidea/udc.h | 6 +
> include/linux/usb/chipidea.h | 7 +-
> 13 files changed, 401 insertions(+), 112 deletions(-)
> create mode 100644 drivers/usb/chipidea/otg.c
> create mode 100644 drivers/usb/chipidea/otg.h
>
--
Best Regards,
Peter Chen
More information about the linux-arm-kernel
mailing list