[Qemu-devel] SCSI bus failures with qemu-arm in kernel 3.8+
Guenter Roeck
linux at roeck-us.net
Mon Aug 12 19:04:08 EDT 2013
On Mon, Aug 12, 2013 at 11:12:50PM +0100, Russell King - ARM Linux wrote:
> On Mon, Aug 12, 2013 at 10:36:17PM +0100, Peter Maydell wrote:
> > On this point, yes. Equivalent bit from the PB926 TRM:
> > http://infocenter.arm.com/help/topic/com.arm.doc.dui0224i/Cacdijji.html
> >
> > (There are differences between the PCI controllers on
> > the different boards. Differences I know of are:
> > * size of the three memory mapped regions
> > * whether the top bits of the PCI address come from the top
> > or bottom of the IMAP* registers
> > I believe (based on some experimentation and an educated guess)
> > that these both changed at the same point, but some of the board
> > TRMs claim to be part one way part the other, presumably due to
> > copy and paste error. In particular PB1176's TRM has a mangled
> > description of the IMAP* registers which didn't match what the
> > h/w actually did in my testing.)
>
> Bah, updated TRMs since my version.
>
> Right, so if I've traced everything correctly, this should work:
>
> /*
> * Slot INTA INTB INTC INTD
> * 31 PCI1 PCI2 PCI3 PCI0
> * 30 PCI0 PCI1 PCI2 PCI3
> * 29 PCI3 PCI0 PCI1 PCI2
> */
> return IRQ_SIC_PCI0 + ((slot + 2 + pin - 1) & 3);
>
I tried the above with qemu 1.5.2. Success!
Hacked diff is below. Can I write that up as clean patch and submit it,
or do we need a test on real hardware ?
Thanks,
Guenter
---
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index e92e5e0..53b4208 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -333,7 +333,11 @@ static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
* 26 1 IRQ_SIC_PCI2
* 27 1 IRQ_SIC_PCI3
*/
+#if 0
irq = IRQ_SIC_PCI0 + ((slot - 24 + pin - 1) & 3);
+#else
+ irq = IRQ_SIC_PCI0 + ((slot + 2 + pin - 1) & 3);
+#endif
return irq;
}
More information about the linux-arm-kernel
mailing list