[PATCH V3 4/8] ARM: tegra: add common LP1 suspend support

Stephen Warren swarren at wwwdotorg.org
Mon Aug 12 15:24:46 EDT 2013


On 08/12/2013 03:40 AM, Joseph Lo wrote:
> The LP1 suspending mode on Tegra means CPU rail off, devices and PLLs are
> clock gated and SDRAM in self-refresh mode. That means the low level LP1
> suspending and resuming code couldn't be run on DRAM and the CPU must
> switch to the always on clock domain (a.k.a. CLK_M 12MHz oscillator). And
> the system clock (SCLK) would be switched to CLK_S, a 32KHz oscillator.
> The LP1 low level handling code need to be moved to IRAM area first. And
> marking the LP1 mask for indicating the Tegra device is in LP1. The CPU
> power timer needs to be re-calculated based on 32KHz that was originally
> based on PCLK.
> 
> When resuming from LP1, the LP1 reset handler will resume PLLs and then
> put DRAM to normal mode. Then jumping to the "tegra_resume" that will
> restore full context before back to kernel. The "tegra_resume" handler
> was expected to be found in PMC_SCRATCH41 register.
> 
> This is common LP1 procedures for Tegra, so we do these jobs mainly in
> this patch:
> * moving LP1 low level handling code to IRAM
> * marking LP1 mask
> * copying the physical address of "tegra_resume" to PMC_SCRATCH41
> * re-calculate the CPU power timer based on 32KHz
> 
> Signed-off-by: Joseph Lo <josephl at nvidia.com>
> ---
> V3:
> * using a "#define" of IRAM_CODE to replace original static variable

I didn't mean change the variable to a define, but rather simply to use
the IO_ADDRESS() define instead of any new define. i.e.:

> diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c

> +#define IRAM_CODE IO_ADDRESS(TEGRA_IRAM_CODE_AREA)

... just don't add that, and ...

> +static void tegra_suspend_enter_lp1(void)
> +{
> +	tegra_pmc_suspend();
> +
> +	/* copy the reset vector & SDRAM shutdown code into IRAM */
> +	memcpy(iram_save_addr, IRAM_CODE, iram_save_size);
> +	memcpy(IRAM_CODE, tegra_lp1_iram.start_addr, iram_save_size);

... and s/IRAM_CODE/IO_ADDRESS(TEGRA_IRAM_CODE_AREA)/ in that code.

I'll make that fixup when applying these patches.



More information about the linux-arm-kernel mailing list