答复: [PATCH v3 2/2] i2c: imx: Add Vybrid VF610 I2C controller support

Lu Jingchang-B35083 B35083 at freescale.com
Mon Aug 12 08:56:07 EDT 2013


________________________________________
>发件人: Mark Rutland [mark.rutland at arm.com]
>发送时间: 2013年8月10日 22:08
>收件人: Lu Jingchang-B35083
>抄送: wsa at the-dreams.de; Estevam Fabio-R49496; Li Xiaochun-B41219; s.hauer at pengutronix.de; linux-i2c at vger.kernel.org; Jin Zhengxiong-R64188; shawn.guo at linaro.org; linux-arm-kernel at lists.infradead.org
>主题: Re: [PATCH v3 2/2] i2c: imx: Add Vybrid VF610 I2C controller support

>On Fri, Aug 02, 2013 at 05:44:08AM +0100, Jingchang Lu wrote:
>>   Add Freescale Vybrid VF610 I2C controller support to
>> imx I2C driver framework.
>>   Some operation is different from imx I2C controller.
>> The register offset, the i2c clock divider value table,
>> the module enabling(I2CR_IEN) which is just invert with imx,
>> and the interrupt flag(I2SR) clearing opcode is w1c on VF610
>> but w0c on imx.
>>
>> Signed-off-by: Jason Jin <Jason.jin at freescale.com>
>> Signed-off-by: Xiaochun Li <b41219 at freescale.com>
>> Signed-off-by: Jingchang Lu <b35083 at freescale.com>
>> ---
>> changes in v3:
>>   Using struct naming the i2c clock {div, regval} pair.
>>  Using address shift handling registers address difference.
>>
>> changes in v2:
>>   Fix building section mismatch(es) warning.
>>
>>  drivers/i2c/busses/i2c-imx.c | 146 ++++++++++++++++++++++++++++++++++++-------
>>  1 file changed, 122 insertions(+), 24 deletions(-)

>[...]

>> @@ -145,6 +233,7 @@ MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
>>  static const struct of_device_id i2c_imx_dt_ids[] = {
>>         { .compatible = "fsl,imx1-i2c", .data = &imx_i2c_devtype[IMX1_I2C], },
>>         { .compatible = "fsl,imx21-i2c", .data = &imx_i2c_devtype[IMX21_I2C], },
>> +       { .compatible = "fsl,vf610-i2c", .data = &imx_i2c_devtype[VF610_I2C], },
>>         { /* sentinel */ }
>>  };


>That string doesn't seem to be documented anywhere (from a quick grep of
>Documentation/devicetree), and there's no binding update included
>here. It would be nice for that to be fixed :)
[Lu Jingchang]
The binding string for i2c-imx driver in Documentation/devicetree/bindings/i2c/i2c-imx.txt use a wildcard format
of "- compatible : Should be "fsl,<chip>-i2c" " for device using this driver. Neither fsl,imx1-i2c nor fsl,imx21-i2c
is described in the binding document. So I just leave the vf610 i2c compatible with this. 
Thanks.


Best Regards,
Jingchang



More information about the linux-arm-kernel mailing list