[PATCH V4 1/4] ASoC: Samsung: I2S: Add quirks as driver data in I2S

Tomasz Figa t.figa at samsung.com
Mon Aug 12 08:06:12 EDT 2013


Hi Padmavathi,

On Monday 12 of August 2013 15:19:51 Padmavathi Venna wrote:
> Samsung has different versions of I2S introduced in different
> platforms. Each version has some new support added for multichannel,
> secondary fifo, s/w reset control and internal mux for rclk src clk.
> Each newly added change has a quirk. So this patch adds all the
> required quirks as driver data and based on compatible string from
> dtsi fetches the quirks.
> 
> Signed-off-by: Padmavathi Venna <padma.v at samsung.com>
> ---
>  .../devicetree/bindings/sound/samsung-i2s.txt      |   18 ++----
>  sound/soc/samsung/i2s.c                            |   62
> +++++++++++-------- 2 files changed, 42 insertions(+), 38 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt
> b/Documentation/devicetree/bindings/sound/samsung-i2s.txt index
> 025e66b..25a0024 100644
> --- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt
> +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
> @@ -2,7 +2,11 @@
> 
>  Required SoC Specific Properties:
> 
> -- compatible : "samsung,i2s-v5"
> +- compatible : should be one of the following.
> +   - samsung,s3c6410-i2s: for 8/16/24bit stereo I2S.
> +   - samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with
> +     secondary fifo, s/w reset control and internal mux for root clk
> src. +
>  - reg: physical base address of the controller and length of memory
> mapped region.
>  - dmas: list of DMA controller phandle and DMA request line ordered
> pairs. @@ -21,13 +25,6 @@ Required SoC Specific Properties:
> 
>  Optional SoC Specific Properties:
> 
> -- samsung,supports-6ch: If the I2S Primary sound source has 5.1 Channel
> -  support, this flag is enabled.
> -- samsung,supports-rstclr: This flag should be set if I2S software reset
> bit -  control is required. When this flag is set I2S software reset bit
> will be -  enabled or disabled based on need.
> -- samsung,supports-secdai:If I2S block has a secondary FIFO and internal
> DMA, -  then this flag is enabled.
>  - samsung,idma-addr: Internal DMA register base address of the audio
>    sub system(used in secondary sound source).
>  - pinctrl-0: Should specify pin control groups used for this controller.
> @@ -36,7 +33,7 @@ Optional SoC Specific Properties:
>  Example:
> 
>  i2s0: i2s at 03830000 {
> -	compatible = "samsung,i2s-v5";
> +	compatible = "samsung,s5pv210-i2s";
>  	reg = <0x03830000 0x100>;
>  	dmas = <&pdma0 10
>  		&pdma0 9
> @@ -46,9 +43,6 @@ i2s0: i2s at 03830000 {
>  		<&clock_audss EXYNOS_I2S_BUS>,
>  		<&clock_audss EXYNOS_SCLK_I2S>;
>  	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
> -	samsung,supports-6ch;
> -	samsung,supports-rstclr;
> -	samsung,supports-secdai;
>  	samsung,idma-addr = <0x03000000>;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&i2s0_bus>;
> diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
> index 47e08dd..1671d9b 100644
> --- a/sound/soc/samsung/i2s.c
> +++ b/sound/soc/samsung/i2s.c
> @@ -40,6 +40,7 @@ enum samsung_dai_type {
> 
>  struct samsung_i2s_dai_data {
>  	int dai_type;
> +	u32 quirks;
>  };
> 
>  struct i2s_dai {
> @@ -1032,18 +1033,18 @@ static struct i2s_dai *i2s_alloc_dai(struct
> platform_device *pdev, bool sec)
> 
>  static const struct of_device_id exynos_i2s_match[];
> 
> -static inline int samsung_i2s_get_driver_data(struct platform_device
> *pdev) +static inline const struct samsung_i2s_dai_data
> *samsung_i2s_get_driver_data( +						struct platform_device 
*pdev)
>  {
>  #ifdef CONFIG_OF
> -	struct samsung_i2s_dai_data *data;
>  	if (pdev->dev.of_node) {
>  		const struct of_device_id *match;
>  		match = of_match_node(exynos_i2s_match, pdev->dev.of_node);
> -		data = (struct samsung_i2s_dai_data *) match->data;
> -		return data->dai_type;
> +		return match->data;
>  	} else
>  #endif
> -		return platform_get_device_id(pdev)->driver_data;
> +		return (struct samsung_i2s_dai_data *)
> +				platform_get_device_id(pdev)->driver_data;
>  }
> 
>  #ifdef CONFIG_PM_RUNTIME
> @@ -1074,13 +1075,13 @@ static int samsung_i2s_probe(struct
> platform_device *pdev) struct resource *res;
>  	u32 regs_base, quirks = 0, idma_addr = 0;
>  	struct device_node *np = pdev->dev.of_node;
> -	enum samsung_dai_type samsung_dai_type;
> +	const struct samsung_i2s_dai_data *i2s_dai_data;
>  	int ret = 0;
> 
>  	/* Call during Seconday interface registration */
> -	samsung_dai_type = samsung_i2s_get_driver_data(pdev);
> +	i2s_dai_data = samsung_i2s_get_driver_data(pdev);
> 
> -	if (samsung_dai_type == TYPE_SEC) {
> +	if (i2s_dai_data->dai_type == TYPE_SEC) {
>  		sec_dai = dev_get_drvdata(&pdev->dev);
>  		if (!sec_dai) {
>  			dev_err(&pdev->dev, "Unable to get drvdata\n");
> @@ -1129,15 +1130,7 @@ static int samsung_i2s_probe(struct
> platform_device *pdev) idma_addr = i2s_cfg->idma_addr;
>  		}
>  	} else {
> -		if (of_find_property(np, "samsung,supports-6ch", NULL))
> -			quirks |= QUIRK_PRI_6CHAN;
> -
> -		if (of_find_property(np, "samsung,supports-secdai", NULL))
> -			quirks |= QUIRK_SEC_DAI;
> -
> -		if (of_find_property(np, "samsung,supports-rstclr", NULL))
> -			quirks |= QUIRK_NEED_RSTCLR;
> -
> +		quirks = i2s_dai_data->quirks;
>  		if (of_property_read_u32(np, "samsung,idma-addr",
>  					 &idma_addr)) {
>  			if (quirks & QUIRK_SEC_DAI) {
> @@ -1250,27 +1243,44 @@ static int samsung_i2s_remove(struct
> platform_device *pdev) return 0;
>  }
> 
> +static const struct samsung_i2s_dai_data i2sv3_dai_type = {
> +	.dai_type = TYPE_PRI,
> +	.quirks = QUIRK_NO_MUXPSR,
> +};
> +
> +static const struct samsung_i2s_dai_data i2sv5_dai_type = {
> +	.dai_type = TYPE_PRI,
> +	.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR,
> +};
> +
> +static const struct samsung_i2s_dai_data samsung_dai_type_pri = {
> +	.dai_type = TYPE_PRI,
> +};
> +
> +static const struct samsung_i2s_dai_data samsung_dai_type_sec = {
> +	.dai_type = TYPE_SEC,
> +};
> +
>  static struct platform_device_id samsung_i2s_driver_ids[] = {
>  	{
>  		.name           = "samsung-i2s",
> -		.driver_data	= TYPE_PRI,
> +		.driver_data    = (kernel_ulong_t)&samsung_dai_type_pri,
>  	}, {
>  		.name           = "samsung-i2s-sec",
> -		.driver_data	= TYPE_SEC,
> +		.driver_data    = (kernel_ulong_t)&samsung_dai_type_sec,
>  	},
>  	{},
>  };
>  MODULE_DEVICE_TABLE(platform, samsung_i2s_driver_ids);
> 
>  #ifdef CONFIG_OF
> -static struct samsung_i2s_dai_data samsung_i2s_dai_data_array[] = {
> -	[TYPE_PRI] = { TYPE_PRI },
> -	[TYPE_SEC] = { TYPE_SEC },
> -};
> -
>  static const struct of_device_id exynos_i2s_match[] = {
> -	{ .compatible = "samsung,i2s-v5",
> -	  .data = &samsung_i2s_dai_data_array[TYPE_PRI],
> +	{
> +		.compatible = "samsung,s3c6410-i2s",
> +		.data = &i2sv3_dai_type,
> +	}, {
> +		.compatible = "samsung,s5pv210-i2s",
> +		.data = &i2sv5_dai_type,

There is still a hole in this series, between patch 1/4 and 4/4, where 
existing platforms are broken. This will break bisects.

I have commented on this in previous version of this series and suggested 
two possible solutions, one preferred and one low-effort.

Otherwise looks good.

Best regards,
Tomasz




More information about the linux-arm-kernel mailing list