[PATCH 1/2] ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator

[Shawn Guo]

On Mon, Aug 12, 2013 at 12:14:26PM +0800, Peter Chen wrote:
> We enabled USB host 1, so host 1's vbus should be on to let
> host 1 work.
> 
> Signed-off-by: Peter Chen <peter.chen at freescale.com>
> ---
>  arch/arm/boot/dts/imx6qdl-sabresd.dtsi |   25 ++++++++++++++++++-------
>  1 files changed, 18 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> index 61b8959..b4db3f7 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> @@ -34,6 +34,15 @@
>  			enable-active-high;
>  		};
>  
> +		reg_usb_h1_vbus: usb_h1_vbus {
> +			compatible = "regulator-fixed";
> +			regulator-name = "usb_h1_vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			gpio = <&gpio1 29 0>;
> +			enable-active-high;
> +		};
> +
>  		reg_audio: wm8962_supply {
>  			compatible = "regulator-fixed";
>  			regulator-name = "wm8962-supply";
> @@ -188,13 +197,14 @@
>  	hog {
>  		pinctrl_hog: hoggrp {
>  			fsl,pins = <
> -				MX6QDL_PAD_GPIO_4__GPIO1_IO04   0x80000000
> -				MX6QDL_PAD_GPIO_5__GPIO1_IO05   0x80000000
> -				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
> -				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
> -				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
> -				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
> -				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
> +				MX6QDL_PAD_GPIO_4__GPIO1_IO04   	0x80000000
> +				MX6QDL_PAD_GPIO_5__GPIO1_IO05   	0x80000000
> +				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 	0x80000000
> +				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 	0x80000000
> +				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 	0x80000000
> +				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 	0x80000000
> +				MX6QDL_PAD_GPIO_0__CCM_CLKO1    	0x130b0
> +				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000

It's not worth to change so many lines of code only for getting the
indentation aligned.  I fixed it up and manually applied both patches,
as they do not apply on my imx/dt branch.

Shawn

>  			>;
>  		};
>  	};
> @@ -228,6 +238,7 @@
>  };
>  
>  &usbh1 {
> +	vbus-supply = <&reg_usb_h1_vbus>;
>  	status = "okay";
>  };
>  
> -- 
> 1.7.1
> 
>