[PATCH v15 12/13] usb: chipidea: retire flag CI_HDRC_PULLUP_ON_VBUS

Peter Chen peter.chen at freescale.com
Sun Aug 11 21:22:58 EDT 2013


Currently, the controller only runs when the ci->vbus_active is true.
So the flag CI_HDRC_PULLUP_ON_VBUS is useless no longer.
If the user doesn't have otgsc, he/she needs to change ci_handle_vbus_change
to update ci->vbus_active.

Signed-off-by: Peter Chen <peter.chen at freescale.com>
---
 drivers/usb/chipidea/ci_hdrc_imx.c |    1 -
 drivers/usb/chipidea/ci_hdrc_msm.c |    1 -
 drivers/usb/chipidea/udc.c         |   24 ++++++------------------
 include/linux/usb/chipidea.h       |    1 -
 4 files changed, 6 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index bd1fe25..ab3e74a 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -91,7 +91,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 		.name		= "ci_hdrc_imx",
 		.capoffset	= DEF_CAPOFFSET,
 		.flags		= CI_HDRC_REQUIRE_TRANSCEIVER |
-				  CI_HDRC_PULLUP_ON_VBUS |
 				  CI_HDRC_DISABLE_STREAMING,
 	};
 	int ret;
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index fb657ef..2d51d85 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -49,7 +49,6 @@ static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = {
 	.name			= "ci_hdrc_msm",
 	.flags			= CI_HDRC_REGS_SHARED |
 				  CI_HDRC_REQUIRE_TRANSCEIVER |
-				  CI_HDRC_PULLUP_ON_VBUS |
 				  CI_HDRC_DISABLE_STREAMING,
 
 	.notify_event		= ci_hdrc_msm_notify_event,
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 45abf4d..90c3572 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1448,9 +1448,6 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 	unsigned long flags;
 	int gadget_ready = 0;
 
-	if (!(ci->platdata->flags & CI_HDRC_PULLUP_ON_VBUS))
-		return -EOPNOTSUPP;
-
 	spin_lock_irqsave(&ci->lock, flags);
 	ci->vbus_active = is_active;
 	if (ci->driver)
@@ -1635,13 +1632,11 @@ static int ci_udc_start(struct usb_gadget *gadget,
 
 	ci->driver = driver;
 	pm_runtime_get_sync(&ci->gadget.dev);
-	if (ci->platdata->flags & CI_HDRC_PULLUP_ON_VBUS) {
-		if (ci->vbus_active) {
-			hw_device_reset(ci, USBMODE_CM_DC);
-		} else {
-			pm_runtime_put_sync(&ci->gadget.dev);
-			goto done;
-		}
+	if (ci->vbus_active) {
+		hw_device_reset(ci, USBMODE_CM_DC);
+	} else {
+		pm_runtime_put_sync(&ci->gadget.dev);
+		goto done;
 	}
 
 	retval = hw_device_state(ci, ci->ep0out->qh.dma);
@@ -1664,8 +1659,7 @@ static int ci_udc_stop(struct usb_gadget *gadget,
 
 	spin_lock_irqsave(&ci->lock, flags);
 
-	if (!(ci->platdata->flags & CI_HDRC_PULLUP_ON_VBUS) ||
-			ci->vbus_active) {
+	if (ci->vbus_active) {
 		hw_device_state(ci, 0);
 		if (ci->platdata->notify_event)
 			ci->platdata->notify_event(ci,
@@ -1800,12 +1794,6 @@ static int udc_start(struct ci_hdrc *ci)
 		}
 	}
 
-	if (!(ci->platdata->flags & CI_HDRC_PULLUP_ON_VBUS)) {
-		retval = hw_device_reset(ci, USBMODE_CM_DC);
-		if (retval)
-			goto put_transceiver;
-	}
-
 	if (ci->transceiver) {
 		retval = otg_set_peripheral(ci->transceiver->otg,
 						&ci->gadget);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 10a607c..7d39967 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -18,7 +18,6 @@ struct ci_hdrc_platform_data {
 	unsigned long	 flags;
 #define CI_HDRC_REGS_SHARED		BIT(0)
 #define CI_HDRC_REQUIRE_TRANSCEIVER	BIT(1)
-#define CI_HDRC_PULLUP_ON_VBUS		BIT(2)
 #define CI_HDRC_DISABLE_STREAMING	BIT(3)
 	/*
 	 * Only set it when DCCPARAMS.DC==1 and DCCPARAMS.HC==1,
-- 
1.7.1





More information about the linux-arm-kernel mailing list