[PATCH v6 09/11] clk: mmp: parse clock from dts

[Mark Rutland]

On Sat, Aug 10, 2013 at 12:06:01PM +0100, Tomasz Figa wrote:
> Hi Mark, Haojian,
> 
> On Friday 09 of August 2013 17:04:01 Mark Rutland wrote:
> > On Fri, Jul 26, 2013 at 11:05:31AM +0100, Haojian Zhuang wrote:
> > > Parse clock information from DTS file for mach-mmp.
> > > 
> > > Changelog:
> > > v6:
> > > 1. Remove marvell string from properties in clock driver.
> > > 2. Append document for clock binding device tree.
> > > 3. Use apbc to replace apbcp. Since the main difference is register
> > > base.
> > > 
> > > v5:
> > > 1. Replace clk_register_mux() by clk_register_mux_table().
> > > 
> > > Signed-off-by: Haojian Zhuang <haojian.zhuang at gmail.com>
> > > ---
> > > 
> > >  .../devicetree/bindings/clock/mmp-clock.txt        |  51 ++++
> > >  arch/arm/mach-mmp/mmp-dt.c                         |   2 +
> > >  drivers/clk/mmp/Makefile                           |   2 +-
> > >  drivers/clk/mmp/clk-mmp.c                          | 300
> > >  +++++++++++++++++++++ 4 files changed, 354 insertions(+), 1
> > >  deletion(-)
> > >  create mode 100644
> > >  Documentation/devicetree/bindings/clock/mmp-clock.txt create mode
> > >  100644 drivers/clk/mmp/clk-mmp.c
> > > 
> > > diff --git a/Documentation/devicetree/bindings/clock/mmp-clock.txt
> > > b/Documentation/devicetree/bindings/clock/mmp-clock.txt new file mode
> > > 100644
> > > index 0000000..5fe52a2
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/clock/mmp-clock.txt
> > > @@ -0,0 +1,51 @@
> > > +Device Tree Clock bindings for arch-mmp
> > > +
> > > +This binding uses the common clock binding[1].
> > > +
> > > +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> > > +
> > 
> > Are these used somewhere already?
> 
> Hmm? Are you asking about the generic clock bindings or I didn't get your 
> question right? They are supposed to be used (and they are used) whenever 
> clocks are involved.

Sorry, I meant are there any dts out there using these specific
bindings? I wasn't sure how far upstream the series was, and wanted to
make sure this hadn't gone upstream before I managed to reply.

Thanks,
Mark