[PATCH V4 6/6] USB: OHCI: make ohci-s3c2410 a separate driver

Tomasz Figa tomasz.figa at gmail.com
Sat Aug 10 06:53:31 EDT 2013


Hi Manjunath,

On Saturday 10 of August 2013 13:07:36 Manjunath Goudar wrote:
> Separate the Samsung OHCI S3CXXXX host controller driver from ohci-hcd
> host code so that it can be built as a separate driver module.
> This work is part of enabling multi-platform kernels on ARM;
> it would be nice to have in 3.12.
> 
> Signed-off-by: Manjunath Goudar <manjunath.goudar at linaro.org>
> Signed-off-by: Deepak Saxena <dsaxena at linaro.org>
> Acked-by: Alan Stern <stern at rowland.harvard.edu>
> Cc: Arnd Bergmann <arnd at arndb.de>
> Cc: Greg KH <greg at kroah.com>
> Cc: linux-usb at vger.kernel.org
> 
> V2:
>  -Set non-standard fields in ohci_s3c2410_hc_driver manually, rather
> than relying on an expanded struct ohci_driver_overrides.
>  -Save orig_ohci_hub_control and orig_ohci_hub_status_data rather than
>   relying on ohci_hub_control and hub_status_data being exported.
> 
> V3:
>  -Kconfig wrong parentheses discription fixed.
>  -ohci_setup() has been removed because it is called in .reset member
>   of the ohci_hc_driver structure.
> 
> V4:
>  - Removed extra space before the '='.
>  - Moved  /* forward definitions */ line before the declarations of
> functions. ---
>  drivers/usb/host/Kconfig        |    8 +++
>  drivers/usb/host/Makefile       |    1 +
>  drivers/usb/host/ohci-hcd.c     |   18 ------
>  drivers/usb/host/ohci-s3c2410.c |  128
> +++++++++++++++++---------------------- 4 files changed, 66
> insertions(+), 89 deletions(-)
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 693560a..795d14d 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -390,6 +390,14 @@ config USB_OHCI_HCD_SPEAR
>            Enables support for the on-chip OHCI controller on
>            ST SPEAr chips.
> 
> +config USB_OHCI_HCD_S3CXXXX
> +        tristate "Support for S3CXXXX on-chip OHCI USB controller"

As far as I remember, you were supposed to keep the original name of this 
driver, as I suggested in previous iteration of this patch and you agreed. 
S3CXXXX is totally confusing when it's about Samsung SoC naming.

So here the config entry would be USB_OHCI_HCD_S3C2410 and I would call it 
"OHCI support for Samsung S3C24xx/S3C64xx SoC series".

> +        depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
> +        default y
> +        ---help---
> +          Enables support for the on-chip OHCI controller on
> +          S3CXXXX chips.

S3C24xx/S3C64xx chips

> +
>  config USB_OHCI_HCD_AT91
>          tristate "Support for Atmel on-chip OHCI USB controller"
>          depends on USB_OHCI_HCD && ARCH_AT91
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index a0ac663..d3e9e66 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -49,6 +49,7 @@ obj-$(CONFIG_USB_OHCI_HCD_OMAP1)	+= ohci-omap.o
>  obj-$(CONFIG_USB_OHCI_HCD_OMAP3)	+= ohci-omap3.o
>  obj-$(CONFIG_USB_OHCI_HCD_SPEAR)	+= ohci-spear.o
>  obj-$(CONFIG_USB_OHCI_HCD_AT91)	+= ohci-at91.o
> +obj-$(CONFIG_USB_OHCI_HCD_S3CXXXX)	+= ohci-s3c2410.o

CONFIG_USB_OHCI_HCD_S3C2410

> 
>  obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
>  obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
> diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
> index b48c892..b69a49e 100644
> --- a/drivers/usb/host/ohci-hcd.c
> +++ b/drivers/usb/host/ohci-hcd.c
> @@ -1177,11 +1177,6 @@ MODULE_LICENSE ("GPL");
>  #define SA1111_DRIVER		ohci_hcd_sa1111_driver
>  #endif
> 
> -#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX)
> -#include "ohci-s3c2410.c"
> -#define S3C2410_PLATFORM_DRIVER	ohci_hcd_s3c2410_driver
> -#endif
> -
>  #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
>  #include "ohci-pxa27x.c"
>  #define PLATFORM_DRIVER		ohci_hcd_pxa27x_driver
> @@ -1293,12 +1288,6 @@ static int __init ohci_hcd_mod_init(void)
>  		goto error_tmio;
>  #endif
> 
> -#ifdef S3C2410_PLATFORM_DRIVER
> -	retval = platform_driver_register(&S3C2410_PLATFORM_DRIVER);
> -	if (retval < 0)
> -		goto error_s3c2410;
> -#endif
> -
>  #ifdef EP93XX_PLATFORM_DRIVER
>  	retval = platform_driver_register(&EP93XX_PLATFORM_DRIVER);
>  	if (retval < 0)
> @@ -1332,10 +1321,6 @@ static int __init ohci_hcd_mod_init(void)
>  	platform_driver_unregister(&EP93XX_PLATFORM_DRIVER);
>   error_ep93xx:
>  #endif
> -#ifdef S3C2410_PLATFORM_DRIVER
> -	platform_driver_unregister(&S3C2410_PLATFORM_DRIVER);
> - error_s3c2410:
> -#endif
>  #ifdef TMIO_OHCI_DRIVER
>  	platform_driver_unregister(&TMIO_OHCI_DRIVER);
>   error_tmio:
> @@ -1382,9 +1367,6 @@ static void __exit ohci_hcd_mod_exit(void)
>  #ifdef EP93XX_PLATFORM_DRIVER
>  	platform_driver_unregister(&EP93XX_PLATFORM_DRIVER);
>  #endif
> -#ifdef S3C2410_PLATFORM_DRIVER
> -	platform_driver_unregister(&S3C2410_PLATFORM_DRIVER);
> -#endif
>  #ifdef TMIO_OHCI_DRIVER
>  	platform_driver_unregister(&TMIO_OHCI_DRIVER);
>  #endif
> diff --git a/drivers/usb/host/ohci-s3c2410.c
> b/drivers/usb/host/ohci-s3c2410.c index e125770..48b5948 100644
> --- a/drivers/usb/host/ohci-s3c2410.c
> +++ b/drivers/usb/host/ohci-s3c2410.c
> @@ -19,19 +19,36 @@
>   * This file is licenced under the GPL.
>  */
> 
> -#include <linux/platform_device.h>
>  #include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
>  #include <linux/platform_data/usb-ohci-s3c2410.h>
> +#include <linux/usb.h>
> +#include <linux/usb/hcd.h>
> +
> +#include "ohci.h"
> +
> 
>  #define valid_port(idx) ((idx) == 1 || (idx) == 2)
> 
>  /* clock device associated with the hcd */
> 
> +
> +#define DRIVER_DESC "OHCI S3CXXXX driver"

OHCI S3C2410 driver

> +
> +static const char hcd_name[] = "ohci-s3cxxxx";

ohci-s3c2410

> +
>  static struct clk *clk;
>  static struct clk *usb_clk;
> 
>  /* forward definitions */
> 
> +static int (*orig_ohci_hub_control)(struct usb_hcd  *hcd, u16 typeReq,
> +			u16 wValue, u16 wIndex, char *buf, u16 wLength);
> +static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char
> *buf); +
>  static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
> 
>  /* conversion functions */
> @@ -93,7 +110,7 @@ ohci_s3c2410_hub_status_data(struct usb_hcd *hcd,
> char *buf) int orig;
>  	int portno;
> 
> -	orig  = ohci_hub_status_data(hcd, buf);
> +	orig = orig_ohci_hub_status_data(hcd, buf);
> 
>  	if (info == NULL)
>  		return orig;
> @@ -164,7 +181,7 @@ static int ohci_s3c2410_hub_control(
>  	 * process the request straight away and exit */
> 
>  	if (info == NULL) {
> -		ret = ohci_hub_control(hcd, typeReq, wValue,
> +		ret = orig_ohci_hub_control(hcd, typeReq, wValue,
>  				       wIndex, buf, wLength);
>  		goto out;
>  	}
> @@ -214,7 +231,7 @@ static int ohci_s3c2410_hub_control(
>  		break;
>  	}
> 
> -	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, 
wLength);
> +	ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex, buf,
> wLength); if (ret)
>  		goto out;
> 
> @@ -373,8 +390,6 @@ static int usb_hcd_s3c2410_probe(const struct
> hc_driver *driver,
> 
>  	s3c2410_start_hc(dev, hcd);
> 
> -	ohci_hcd_init(hcd_to_ohci(hcd));
> -
>  	retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
>  	if (retval != 0)
>  		goto err_ioremap;
> @@ -391,71 +406,7 @@ static int usb_hcd_s3c2410_probe(const struct
> hc_driver *driver,
> 
>  /*---------------------------------------------------------------------
> ----*/
> 
> -static int
> -ohci_s3c2410_start(struct usb_hcd *hcd)
> -{
> -	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
> -	int ret;
> -
> -	ret = ohci_init(ohci);
> -	if (ret < 0)
> -		return ret;
> -
> -	ret = ohci_run(ohci);
> -	if (ret < 0) {
> -		dev_err(hcd->self.controller, "can't start %s\n",
> -			hcd->self.bus_name);
> -		ohci_stop(hcd);
> -		return ret;
> -	}
> -
> -	return 0;
> -}
> -
> -
> -static const struct hc_driver ohci_s3c2410_hc_driver = {
> -	.description =		hcd_name,
> -	.product_desc =		"S3C24XX OHCI",
> -	.hcd_priv_size =	sizeof(struct ohci_hcd),
> -
> -	/*
> -	 * generic hardware linkage
> -	 */
> -	.irq =			ohci_irq,
> -	.flags =		HCD_USB11 | HCD_MEMORY,
> -
> -	/*
> -	 * basic lifecycle operations
> -	 */
> -	.start =		ohci_s3c2410_start,
> -	.stop =			ohci_stop,
> -	.shutdown =		ohci_shutdown,
> -
> -	/*
> -	 * managing i/o requests and associated device resources
> -	 */
> -	.urb_enqueue =		ohci_urb_enqueue,
> -	.urb_dequeue =		ohci_urb_dequeue,
> -	.endpoint_disable =	ohci_endpoint_disable,
> -
> -	/*
> -	 * scheduling support
> -	 */
> -	.get_frame_number =	ohci_get_frame,
> -
> -	/*
> -	 * root hub support
> -	 */
> -	.hub_status_data =	ohci_s3c2410_hub_status_data,
> -	.hub_control =		ohci_s3c2410_hub_control,
> -#ifdef	CONFIG_PM
> -	.bus_suspend =		ohci_bus_suspend,
> -	.bus_resume =		ohci_bus_resume,
> -#endif
> -	.start_port_reset =	ohci_start_port_reset,
> -};
> -
> -/* device driver */
> +static struct hc_driver __read_mostly ohci_s3c2410_hc_driver;
> 
>  static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev)
>  {
> @@ -532,4 +483,39 @@ static struct platform_driver
> ohci_hcd_s3c2410_driver = { },
>  };
> 
> +static int __init ohci_s3cxxxx_init(void)

ohci_s3c2410_init

> +{
> +	if (usb_disabled())
> +		return -ENODEV;
> +
> +	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
> +	ohci_init_driver(&ohci_s3c2410_hc_driver, NULL);
> +
> +	/*
> +	 * The Samsung HW has some unusual quirks, which require
> +	 * Sumsung-specific workarounds. We override certain hc_driver
> +	 * functions here to achieve that. We explicitly do not enhance
> +	 * ohci_driver_overrides to allow this more easily, since this
> +	 * is an unusual case, and we don't want to encourage others to
> +	 * override these functions by making it too easy.
> +	 */
> +
> +	orig_ohci_hub_control = ohci_s3c2410_hc_driver.hub_control;
> +	orig_ohci_hub_status_data = 
ohci_s3c2410_hc_driver.hub_status_data;
> +
> +	ohci_s3c2410_hc_driver.hub_status_data	= 
ohci_s3c2410_hub_status_data;
> +	ohci_s3c2410_hc_driver.hub_control	= 
ohci_s3c2410_hub_control; +
> +	return platform_driver_register(&ohci_hcd_s3c2410_driver);
> +}
> +module_init(ohci_s3cxxxx_init);
> +
> +static void __exit ohci_s3cxxxx_cleanup(void)

ohci_s3c2410_cleanup

> +{
> +	platform_driver_unregister(&ohci_hcd_s3c2410_driver);
> +}
> +module_exit(ohci_s3cxxxx_cleanup);
> +
> +MODULE_DESCRIPTION(DRIVER_DESC);
> +MODULE_LICENSE("GPL");
>  MODULE_ALIAS("platform:s3c2410-ohci");

Best regards,
Tomasz




More information about the linux-arm-kernel mailing list