[PATCH v9 06/16] ARM: dts: Add description of System MMU of Exynos SoCs
Tomasz Figa
tomasz.figa at gmail.com
Fri Aug 9 04:04:03 EDT 2013
On Friday 09 of August 2013 15:15:57 Cho KyongHo wrote:
> On Fri, 09 Aug 2013 00:26:51 +0200, Tomasz Figa wrote:
> > Hi KyongHo,
> >
> > On Thursday 08 of August 2013 18:38:35 Cho KyongHo wrote:
> > > Signed-off-by: Cho KyongHo <pullip.cho at samsung.com>
> > > ---
> > >
> > > .../bindings/iommu/samsung,exynos4210-sysmmu.txt | 103 +++++++
> > > arch/arm/boot/dts/exynos4.dtsi | 122 ++++++++
> > > arch/arm/boot/dts/exynos4210.dtsi | 25 ++
> > > arch/arm/boot/dts/exynos4x12.dtsi | 82 ++++++
> > > arch/arm/boot/dts/exynos5250.dtsi | 290
> > >
> > > ++++++++++++++++++++ 5 files changed, 622 insertions(+), 0
> > > deletions(-)
> > >
> > > create mode 100644
> > >
> > > Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.tx
> > > t
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.
> > > txt
> > > b/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.
> > > txt
> > > new file mode 100644
> > > index 0000000..92f0a33
> > > --- /dev/null
> > > +++
> > > b/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.
> > > txt
> > > @@ -0,0 +1,103 @@
> > > +Samsung Exynos4210 IOMMU H/W, System MMU (System Memory Management
> > > Unit) +
> > > +Samsung's Exynos architecture contains System MMU that enables
> > > scattered +physical memory chunks visible as a contiguous region to
> > > DMA-capable peripheral +devices like MFC, FIMC, FIMD, GScaler,
> > > FIMC-IS
> > > and so forth.
> > > +
> > > +System MMU is a sort of IOMMU and support identical translation
> > > table
> > > format to +ARMv7 translation tables with minimum set of page
> > > properties
> > > including access +permissions, shareability and security protection.
> > > In
> > > addition, System MMU has +another capabilities like L2 TLB or
> > > block-fetch buffers to minimize translation +latency.
> > > +
> > > +A System MMU is dedicated to a single master peripheral device.
> > > Thus,
> > > it is +important to specify the correct System MMU in the device
> > > node
> > > of its master +device. Whereas a System MMU is dedicated to a master
> > > device, the master device +may have more than one System MMU.
> >
> > This paragraph is still not clear. What about something among these
lines:
> Yes. It is my fault.
> It is still unchanged... even though Grant sugessted clear and simple
> sentence. It must be changed :)
>
> > System MMUs are in many to one relation with peripheral devices, i.e.
> > single peripheral device might have multiple System MMUs (usually one
> > for each bus master), but one System MMU can handle only one
> > peripheral device. The relation between a System MMU and the
> > peripheral device it handles needs to be defined in device node of
> > this peripheral device.
> That looks good to me.
> Please let me use your sentences.
OK.
> > > +Required properties:
> > > +- compatible: Should be "samsung,exynos4210-sysmmu"
> > > +- reg: A tuple of base address and size of System MMU registers.
> > > +- interrupt-parent: The phandle of the interrupt controller of
> > > System
> > > MMU +- interrupts: A tuple of numbers that indicates the interrupt
> > > source.
> >
> > interrupts: An interrupt specifier for interrupt signal of System MMU,
> > according to format defined for particular interrupt parent.
>
> Yes.. it is not changed..
>
> > > +- clock-names: Should be "sysmmu" if the System MMU is needed
> > > to gate its clock. + Please refer to the following
> > > documents:
> > > + Documentation/devicetree/bindings/clock/clock-bindings.txt
> > > + Documentation/devicetree/bindings/clock/exynos4-clock.txt
> > > + Documentation/devicetree/bindings/clock/exynos5250-
> >
> > clock.txt
> >
> > > + Optional "master" if the clock to the System MMU is gated
> >
> > by
> >
> > > + another gate clock other than "sysmmu". The System MMU
> >
> > driver
> >
> > > + sets "master" the parent of "sysmmu".
> > > + Exynos4 SoCs, there needs no "master" clocks.
> > > + Exynos5 SoCs, some System MMUs must have "master" clocks.
> > > +- clocks: Required if the System MMU is needed to gate its clock.
> > > + Please refer to the documents listed above.
> > > +- samsung,power-domain: Required if the System MMU is needed to
> > > gate
> > > its power. + Please refer to the following document:
> > > + Documentation/devicetree/bindings/arm/exynos/power_domain.txt
> > > +
> > > +Required properties for the master peripheral devices:
> > > +- iommu: phandles to the System MMUs of the device
> > > +
> > > +Examples:
> > > +A System MMU is dedicated to a single master device.
> > > + gsc_0: gsc at 0x13e00000 {
> >
> > nit: duplicated space after gsc_0: and incorrect 0x prefix in node
> > unit- address.
>
> Ok.
>
> > > + compatible = "samsung,exynos5-gsc";
> > > + reg = <0x13e00000 0x1000>;
> > > + interrupts = <0 85 0>;
> > > + samsung,power-domain = <&pd_gsc>;
> > > + clocks = <&clock 256>;
> > > + clock-names = "gscl";
> > > + iommu = <&sysmmu_gsc1>;
> > > + };
> > > +
> > > + sysmmu_gsc0: sysmmu at 13E80000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13E80000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-gsc0";
> >
> > Hmm? interrupt-names property is not defined in your binding
> > documentation and also the value here looks wrong. This should be a
> > generic interrupt signal name that the SysMMU driver can understand,
> > e.g. "sysmmu", without the "-gsc0" suffix.
>
> Oh. I didn't know that. Thank you.
> As I replied in your previous mail about v8 patch, I thought it may be
> useful for printing debugging information.
>
> > > + interrupts = <2 0>;
> > > + clock-names = "sysmmu", "master";
> > > + clocks = <&clock 262>, <&clock 256>;
> > > + samsung,power-domain = <&pd_gsc>;
> > > + status = "ok";
> >
> > "ok" is not a valid value of status property, "okay" is. Still, I
> > don't
> > think this is a relevant property in this example, so maybe it could
> > be
> > omitted (status is "okay" by default anyway)?
>
> Actually "ok" is valid value.
> Please see the description of of_device_is_available().
The handling of "ok" looks like a quirk for some broken device trees that
somehow got out of the spec. The ePAPR specification[1], chapter 2.3.4
defines a set of values for the "status" property and there is no "ok"
there.
By the way, the ePAPR specification[1] is a good thing to read on device
tree bindings, so you might want to look at it if you want to get more
information on this.
[1] - https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf
> However, I agree with you that it can be omitted.
>
> Since status property is not an important information in the
> description, I will remove it from the binding document.
>
> How about dtsi files?
> should it be removed from dtsi files as you addressed below?
Yes, I think so.
Best regards,
Tomasz
> > > + };
> > > +
> > > +MFC has 2 System MMUs for each port that MFC is attached. Thus it
> > > seems natural +to define 2 System MMUs for each port of the MFC:
> > > +
> > > + mfc: codec at 13400000 {
> > > + compatible = "samsung,mfc-v5";
> > > + reg = <0x13400000 0x10000>;
> > > + interrupts = <0 94 0>;
> > > + samsung,power-domain = <&pd_mfc>;
> > > + clocks = <&clock 170>, <&clock 273>;
> > > + clock-names = "sclk_mfc", "mfc";
> > > + status = "ok";
> >
> > Ditto.
> >
> > > + iommu = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
> > > + };
> > > +
> > > + sysmmu_mfc_l: sysmmu at 13620000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13620000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-mfc-l";
> > > + interrupts = <5 5>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 274>;
> > > + samsung,power-domain = <&pd_mfc>;
> > > + status = "ok";
> >
> > Ditto.
> >
> > > + };
> > > +
> > > + sysmmu_mfc_r: sysmmu at 13630000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13630000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-mfc-r";
> >
> > Ditto.
> >
> > > + interrupts = <5 6>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 275>;
> > > + samsung,power-domain = <&pd_mfc>;
> > > + status = "ok";
> >
> > Ditto.
> >
> > > + };
> > > +
> > > diff --git a/arch/arm/boot/dts/exynos4.dtsi
> > > b/arch/arm/boot/dts/exynos4.dtsi index 597cfcf..6265984 100644
> > > --- a/arch/arm/boot/dts/exynos4.dtsi
> > > +++ b/arch/arm/boot/dts/exynos4.dtsi
> > > @@ -251,6 +251,7 @@
> > >
> > > clocks = <&clock 170>, <&clock 273>;
> > > clock-names = "sclk_mfc", "mfc";
> > > status = "disabled";
> > >
> > > + iommu = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
> > >
> > > };
> > >
> > > serial at 13800000 {
> > >
> > > @@ -485,5 +486,126 @@
> > >
> > > clock-names = "sclk_fimd", "fimd";
> > > samsung,power-domain = <&pd_lcd0>;
> > > status = "disabled";
> > >
> > > + iommu = <&sysmmu_fimd0>;
> > > + };
> > > +
> > > + sysmmu_mfc_l: sysmmu at 13620000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13620000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-mfc-l";
> >
> > Ditto.
> >
> > > + interrupts = <5 5>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 274>;
> > > + samsung,power-domain = <&pd_mfc>;
> > > + status = "ok";
> >
> > Ditto.
> >
> > > + };
> > > +
> > > + sysmmu_mfc_r: sysmmu at 13630000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13630000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-mfc-r";
> >
> > Ditto.
> >
> > > + interrupts = <5 6>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 275>;
> > > + samsung,power-domain = <&pd_mfc>;
> > > + status = "ok";
> >
> > Ditto.
> >
> > > + };
> > > +
> > > + sysmmu_tv: sysmmu at 12E20000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x12E20000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-tv";
> >
> > Ditto.
> >
> > > + interrupts = <5 4>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 272>;
> > > + samsung,power-domain = <&pd_tv>;
> > > + status = "ok";
> >
> > Ditto.
> >
> > > + };
> > > +
> > > + sysmmu_fimc0: sysmmu at 11A20000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x11A20000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc0";
> >
> > Ditto.
> >
> > > + interrupts = <4 2>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 263>;
> > > + samsung,power-domain = <&pd_cam>;
> > > + status = "ok";
> >
> > Ditto.
> >
> > > + };
> > > +
> > > + sysmmu_fimc1: sysmmu at 11A30000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x11A30000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc1";
> >
> > Ditto.
> >
> > > + interrupts = <4 3>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 264>;
> > > + samsung,power-domain = <&pd_cam>;
> > > + status = "ok";
> >
> > Ditto.
> >
> > > + };
> > > +
> > > + sysmmu_fimc2: sysmmu at 11A40000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x11A40000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc2";
> >
> > Ditto.
> >
> > > + interrupts = <4 4>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 265>;
> > > + samsung,power-domain = <&pd_cam>;
> > > + status = "ok";
> >
> > Ditto.
> >
> > > + };
> > > +
> > > + sysmmu_fimc3: sysmmu at 11A50000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x11A50000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc3";
> >
> > Ditto.
> >
> > > + interrupts = <4 5>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 266>;
> > > + samsung,power-domain = <&pd_cam>;
> > > + status = "ok";
> >
> > Ditto.
> >
> > > + };
> > > +
> > > + sysmmu_jpeg: sysmmu at 11A60000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x11A60000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-jpeg";
> >
> > Ditto.
> >
> > > + interrupts = <4 6>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 267>;
> > > + samsung,power-domain = <&pd_cam>;
> > > + status = "ok";
> >
> > Ditto... and so on in all further sysmmu nodes.
> >
> > Best regards,
> > Tomasz
> >
> > > + };
> > > +
> > > + sysmmu_rotator: sysmmu at 12A30000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x12A30000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-rotator";
> > > + interrupts = <5 0>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 281>;
> > > + samsung,power-domain = <&pd_lcd0>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimd0: sysmmu at 11E20000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x11E20000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimd0";
> > > + interrupts = <5 2>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 287>;
> > > + samsung,power-domain = <&pd_lcd0>;
> > > + status = "ok";
> > >
> > > };
> > >
> > > };
> > >
> > > diff --git a/arch/arm/boot/dts/exynos4210.dtsi
> > > b/arch/arm/boot/dts/exynos4210.dtsi index 057d682..6b0012b 100644
> > > --- a/arch/arm/boot/dts/exynos4210.dtsi
> > > +++ b/arch/arm/boot/dts/exynos4210.dtsi
> > > @@ -124,6 +124,31 @@
> > >
> > > clocks = <&clock 177>, <&clock 277>;
> > > clock-names = "sclk_fimg2d", "fimg2d";
> > > status = "disabled";
> > >
> > > + iommu = <&sysmmu_g2d>;
> > > + };
> > > +
> > > + sysmmu_g2d: sysmmu at 12A20000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x12A20000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-g2d";
> > > + interrupts = <4 7>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 280>;
> > > + samsung,power-domain = <&pd_lcd0>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimd1: sysmmu at 12220000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimd1";
> > > + reg = <0x12220000 0x1000>;
> > > + interrupts = <5 3>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 291>;
> > > + samsung,power-domain = <&pd_lcd1>;
> > > + status = "ok";
> > >
> > > };
> > >
> > > camera {
> > >
> > > diff --git a/arch/arm/boot/dts/exynos4x12.dtsi
> > > b/arch/arm/boot/dts/exynos4x12.dtsi index ad531fe..fcfe118 100644
> > > --- a/arch/arm/boot/dts/exynos4x12.dtsi
> > > +++ b/arch/arm/boot/dts/exynos4x12.dtsi
> > > @@ -176,4 +176,86 @@
> > >
> > > };
> > >
> > > };
> > >
> > > };
> > >
> > > +
> > > + sysmmu_g2d: sysmmu at 10A40000{
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x10A40000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-g2d";
> > > + interrupts = <4 7>;
> > > + clock-names = "sysmmu";
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_isp: sysmmu at 12260000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x12260000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_isp";
> > > + interrupts = <16 2>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 362>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_drc: sysmmu at 12270000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x12270000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_drc";
> > > + interrupts = <16 3>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 363>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_fd: sysmmu at 122A0000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x122A0000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_fd";
> > > + interrupts = <16 4>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 364>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_mcuctl: sysmmu at 122B0000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x122B0000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_mcuctl";
> > > + interrupts = <16 5>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 376>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_lite0: sysmmu at 123B0000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x123B0000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_lite0";
> > > + interrupts = <16 0>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 366>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_lite1: sysmmu at 123C0000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x123C0000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_lite1";
> > > + interrupts = <16 1>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 365>;
> > > + status = "ok";
> > > + };
> > >
> > > };
> > >
> > > diff --git a/arch/arm/boot/dts/exynos5250.dtsi
> > > b/arch/arm/boot/dts/exynos5250.dtsi index 88589b7..c91c9d3 100644
> > > --- a/arch/arm/boot/dts/exynos5250.dtsi
> > > +++ b/arch/arm/boot/dts/exynos5250.dtsi
> > > @@ -78,6 +78,16 @@
> > >
> > > reg = <0x10044040 0x20>;
> > >
> > > };
> > >
> > > + pd_isp: isp-power-domain at 0x10044020 {
> > > + compatible = "samsung,exynos4210-pd";
> > > + reg = <0x10044020 0x20>;
> > > + };
> > > +
> > > + pd_disp1: disp1-power-domain at 0x100440A0 {
> > > + compatible = "samsung,exynos4210-pd";
> > > + reg = <0x100440A0 0x20>;
> > > + };
> > > +
> > >
> > > clock: clock-controller at 10010000 {
> > >
> > > compatible = "samsung,exynos5250-clock";
> > > reg = <0x10010000 0x30000>;
> > >
> > > @@ -577,6 +587,7 @@
> > >
> > > samsung,power-domain = <&pd_gsc>;
> > > clocks = <&clock 256>;
> > > clock-names = "gscl";
> > >
> > > + iommu = <&sysmmu_gsc1>;
> > >
> > > };
> > >
> > > gsc_1: gsc at 13e10000 {
> > >
> > > @@ -586,6 +597,7 @@
> > >
> > > samsung,power-domain = <&pd_gsc>;
> > > clocks = <&clock 257>;
> > > clock-names = "gscl";
> > >
> > > + iommu = <&sysmmu_gsc1>;
> > >
> > > };
> > >
> > > gsc_2: gsc at 13e20000 {
> > >
> > > @@ -595,6 +607,7 @@
> > >
> > > samsung,power-domain = <&pd_gsc>;
> > > clocks = <&clock 258>;
> > > clock-names = "gscl";
> > >
> > > + iommu = <&sysmmu_gsc2>;
> > >
> > > };
> > >
> > > gsc_3: gsc at 13e30000 {
> > >
> > > @@ -604,6 +617,7 @@
> > >
> > > samsung,power-domain = <&pd_gsc>;
> > > clocks = <&clock 259>;
> > > clock-names = "gscl";
> > >
> > > + iommu = <&sysmmu_gsc3>;
> > >
> > > };
> > >
> > > hdmi {
> > >
> > > @@ -620,6 +634,7 @@
> > >
> > > compatible = "samsung,exynos5250-mixer";
> > > reg = <0x14450000 0x10000>;
> > > interrupts = <0 94 0>;
> > >
> > > + iommu = <&sysmmu_tv>;
> > >
> > > };
> > >
> > > dp-controller {
> > >
> > > @@ -646,5 +661,280 @@
> > >
> > > interrupts = <18 4>, <18 5>, <18 6>;
> > > clocks = <&clock 133>, <&clock 339>;
> > > clock-names = "sclk_fimd", "fimd";
> > >
> > > + iommu = <&sysmmu_fimd1>;
> > > + };
> > > +
> > > + sysmmu_mfc_l: sysmmu at 11210000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x11210000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-mfc_l";
> > > + interrupts = <8 5>;
> > > + clock-names = "sysmmu", "master";
> > > + clocks = <&clock 267>, <&clock 266>;
> > > + samsung,power-domain = <&pd_mfc>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_mfc_r: sysmmu at 11200000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x11200000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-mfc_r";
> > > + interrupts = <6 2>;
> > > + clock-names = "sysmmu", "master";
> > > + clocks = <&clock 268>, <&clock 266>;
> > > + samsung,power-domain = <&pd_mfc>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_tv: sysmmu at 14650000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x14650000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-tv";
> > > + interrupts = <7 4>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 349>;
> > > + samsung,power-domain = <&pd_disp1>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_gsc0: sysmmu at 13E80000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13E80000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-gsc0";
> > > + interrupts = <2 0>;
> > > + clock-names = "sysmmu", "master";
> > > + clocks = <&clock 262>, <&clock 256>;
> > > + samsung,power-domain = <&pd_gsc>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_gsc1: sysmmu at 13E90000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13E90000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-gsc1";
> > > + interrupts = <2 2>;
> > > + clock-names = "sysmmu", "master";
> > > + clocks = <&clock 263>, <&clock 257>;
> > > + samsung,power-domain = <&pd_gsc>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_gsc2: sysmmu at 13EA0000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13EA0000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-gsc2";
> > > + interrupts = <2 4>;
> > > + clock-names = "sysmmu", "master";
> > > + clocks = <&clock 264>, <&clock 258>;
> > > + samsung,power-domain = <&pd_gsc>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_gsc3: sysmmu at 13EB0000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13EB0000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-gsc3";
> > > + interrupts = <2 6>;
> > > + clock-names = "sysmmu", "master";
> > > + clocks = <&clock 265>, <&clock 259>;
> > > + samsung,power-domain = <&pd_gsc>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimd1: sysmmu at 14640000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x14640000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimd1";
> > > + interrupts = <3 2>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 350>;
> > > + samsung,power-domain = <&pd_disp1>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_rotator: sysmmu at 11D40000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x11D40000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-rotator";
> > > + interrupts = <4 0>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 272>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_isp: sysmmu at 13260000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13260000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_isp";
> > > + interrupts = <10 6>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 361>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_drc: sysmmu at 13270000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13270000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_drc";
> > > + interrupts = <11 6>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 362>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_fd: sysmmu at 132A0000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x132A0000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_fd";
> > > + interrupts = <5 0>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 363>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_scc: sysmmu at 13280000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13280000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_scalerc";
> > > + interrupts = <5 2>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 364>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_scp: sysmmu at 13290000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13290000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_scalerp";
> > > + interrupts = <3 6>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 365>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_mcuctl: sysmmu at 132B0000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x132B0000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_mcuctl";
> > > + interrupts = <5 4>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 366>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_odc: sysmmu at 132C0000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x132C0000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_odc";
> > > + interrupts = <11 0>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 367>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_dis0: sysmmu at 132D0000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x132D0000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_dis0";
> > > + interrupts = <10 4>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 368>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_dis1: sysmmu at 132E0000{
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x132E0000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_dis1";
> > > + interrupts = <9 4>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 369>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_3dnr: sysmmu at 132F0000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x132F0000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_3dnr";
> > > + interrupts = <5 6>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 370>;
> > > + samsung,power-domain = <&pd_isp>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_lite0: sysmmu at 13C40000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13C40000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_lite0";
> > > + interrupts = <3 4>;
> > > + clock-names = "sysmmu", "master";
> > > + clocks = <&clock 346>, <&clock 345>;
> > > + samsung,power-domain = <&pd_gsc>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_lite1: sysmmu at 13C50000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x13C50000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-fimc_lite1";
> > > + interrupts = <24 1>;
> > > + clock-names = "sysmmu", "master";
> > > + clocks = <&clock 347>, <&clock 345>;
> > > + samsung,power-domain = <&pd_gsc>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_jpeg: sysmmu at 11F20000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x11F20000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-jpeg";
> > > + interrupts = <4 2>;
> > > + clock-names = "sysmmu", "master";
> > > + clocks = <&clock 273>, <&clock 270>;
> > > + samsung,power-domain = <&pd_gsc>;
> > > + status = "ok";
> > > + };
> > > +
> > > + sysmmu_fimc_2d: sysmmu at 10A60000 {
> > > + compatible = "samsung,exynos4210-sysmmu";
> > > + reg = <0x10A60000 0x1000>;
> > > + interrupt-parent = <&combiner>;
> > > + interrupt-names = "sysmmu-2d";
> > > + interrupts = <24 5>;
> > > + clock-names = "sysmmu";
> > > + clocks = <&clock 361>;
> > > + status = "ok";
> > >
> > > };
> > >
> > > };
More information about the linux-arm-kernel
mailing list