[PATCH v9 14/16] iommu/exynos: add support for power management subsystems.
Cho KyongHo
pullip.cho at samsung.com
Fri Aug 9 03:49:43 EDT 2013
On Fri, 09 Aug 2013 01:03:05 +0200, Tomasz Figa wrote:
> Hi KyongHo,
>
> nit: Please drop the trailing dot at the end of patch subject.
>
Oh. I didn't catch that.
Thank you.
> On Thursday 08 of August 2013 18:41:17 Cho KyongHo wrote:
> > This adds support for Advance Power Management and Runtime Power
> > Management.
>
> This patch adds support for system-wide and runtime power management.
>
Ok.
> > Since System MMU is located in the same local power domain of its
> > master H/W, System MMU must be initialized before it is working if
> > its power domain was ever turned off. TLB invalidation according to
> > unmapping on page tables must also be performed while power domain is
> > turned on.
> >
> > This patch ensures that resume and runtime_resume(restore_state)
> > functions in this driver is called before the calls to resume and
> > runtime_resume callback functions in the drivers of master H/Ws.
> > Likewise, suspend and runtime_suspend(save_state) functions in this
> > driver is called after the calls to suspend and runtime_suspend in the
> > drivers of master H/Ws.
> >
> > In order to get benefit of this support, the master H/W and its System
> > MMU must resides in the same power domain in terms of Linux kernel. If
> > a master H/W does not use generic I/O power domain, its driver must
> > call iommu_attach_device() after its local power domain is turned on,
> > iommu_detach_device before turned off.
>
> I don't get the point of this last paragraph. What a power domain can be
> in other terms? Is there any other way to support power domains on Exynos
> than generic power domains?
>
I just addressed the case a device driver turns off local power of its
device without the help of generic I/O powerdomain.
> > Signed-off-by: Cho KyongHo <pullip.cho at samsung.com>
> > ---
> > drivers/iommu/exynos-iommu.c | 235
> > +++++++++++++++++++++++++++++++++++++++++- 1 files changed, 231
> > insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
> > index 9e64483..56aead9 100644
> > --- a/drivers/iommu/exynos-iommu.c
> > +++ b/drivers/iommu/exynos-iommu.c
> > @@ -28,6 +28,7 @@
> > #include <linux/export.h>
> > #include <linux/of.h>
> > #include <linux/of_platform.h>
> > +#include <linux/pm_domain.h>
> > #include <linux/notifier.h>
> >
> > #include <asm/cacheflush.h>
> > @@ -186,6 +187,7 @@ struct sysmmu_drvdata {
> > int activations;
> > rwlock_t lock;
> > struct iommu_domain *domain;
> > + bool runtime_active;
> > unsigned long pgtable;
> > void __iomem *sfrbases[0];
> > };
> > @@ -438,7 +440,8 @@ static bool __sysmmu_disable(struct sysmmu_drvdata
> > *data) data->pgtable = 0;
> > data->domain = NULL;
> >
> > - __sysmmu_disable_nocount(data);
> > + if (data->runtime_active)
> > + __sysmmu_disable_nocount(data);
> >
> > dev_dbg(data->sysmmu, "Disabled\n");
> > } else {
> > @@ -505,7 +508,8 @@ static int __sysmmu_enable(struct sysmmu_drvdata
> > *data, data->pgtable = pgtable;
> > data->domain = domain;
> >
> > - __sysmmu_enable_nocount(data);
> > + if (data->runtime_active)
> > + __sysmmu_enable_nocount(data);
> >
> > dev_dbg(data->sysmmu, "Enabled\n");
> > } else {
> > @@ -609,7 +613,7 @@ static void sysmmu_tlb_invalidate_entry(struct
> > device *dev, unsigned long iova) data =
> > dev_get_drvdata(client->sysmmu[i]);
> >
> > read_lock_irqsave(&data->lock, flags);
> > - if (is_sysmmu_active(data)) {
> > + if (is_sysmmu_active(data) && data->runtime_active) {
> > int i;
> > clk_enable(data->clk_master);
> > for (i = 0; i < data->nsfrs; i++)
> > @@ -637,7 +641,8 @@ void exynos_sysmmu_tlb_invalidate(struct device
> > *dev) data = dev_get_drvdata(client->sysmmu[i]);
> >
> > read_lock_irqsave(&data->lock, flags);
> > - if (is_sysmmu_active(data)) {
> > + if (is_sysmmu_active(data) &&
> > + data->runtime_active) {
>
> nit: The whole if condition fits into single line.
Ok.
>
> > int i;
> > for (i = 0; i < data->nsfrs; i++) {
> > clk_enable(data->clk_master);
> > @@ -711,6 +716,8 @@ static int __init exynos_sysmmu_probe(struct
> > platform_device *pdev) }
> > }
> >
> > + pm_runtime_enable(dev);
> > +
> > data->sysmmu = dev;
> >
> > data->clk = devm_clk_get(dev, "sysmmu");
> > @@ -736,6 +743,8 @@ static int __init exynos_sysmmu_probe(struct
> > platform_device *pdev) return ret;
> > }
> >
> > + data->runtime_active = !pm_runtime_enabled(dev);
> > +
> > rwlock_init(&data->lock);
> >
> > platform_set_drvdata(pdev, data);
> > @@ -744,6 +753,34 @@ static int __init exynos_sysmmu_probe(struct
> > platform_device *pdev) return ret;
> > }
> >
> > +#ifdef CONFIG_PM_SLEEP
> > +static int sysmmu_suspend(struct device *dev)
> > +{
> > + struct sysmmu_drvdata *data = dev_get_drvdata(dev);
> > + unsigned long flags;
> > + read_lock_irqsave(&data->lock, flags);
> > + if (is_sysmmu_active(data) &&
> > + (!pm_runtime_enabled(dev) || data->runtime_active))
> > + __sysmmu_disable_nocount(data);
> > + read_unlock_irqrestore(&data->lock, flags);
> > + return 0;
> > +}
> > +
> > +static int sysmmu_resume(struct device *dev)
> > +{
> > + struct sysmmu_drvdata *data = dev_get_drvdata(dev);
> > + unsigned long flags;
> > + read_lock_irqsave(&data->lock, flags);
> > + if (is_sysmmu_active(data) &&
> > + (!pm_runtime_enabled(dev) || data->runtime_active))
> > + __sysmmu_enable_nocount(data);
> > + read_unlock_irqrestore(&data->lock, flags);
> > + return 0;
> > +}
> > +#endif
> > +
> > +static SIMPLE_DEV_PM_OPS(sysmmu_pm_ops, sysmmu_suspend, sysmmu_resume);
> > +
> > #ifdef CONFIG_OF
> > static struct of_device_id sysmmu_of_match[] __initconst = {
> > { .compatible = "samsung,exynos4210-sysmmu", },
> > @@ -756,6 +793,7 @@ static struct platform_driver exynos_sysmmu_driver
> > __refdata = { .driver = {
> > .owner = THIS_MODULE,
> > .name = "exynos-sysmmu",
> > + .pm = &sysmmu_pm_ops,
> > .of_match_table = of_match_ptr(sysmmu_of_match),
> > }
> > };
> > @@ -1141,6 +1179,163 @@ static int __init exynos_iommu_init(void)
> > }
> > subsys_initcall(exynos_iommu_init);
> >
> > +#ifdef CONFIG_PM_SLEEP
> > +static int sysmmu_pm_genpd_suspend(struct device *dev)
> > +{
> > + struct exynos_iommu_client *client = dev->archdata.iommu;
> > + int ret = 0;
> > + int i;
> > +
> > + for (i = 0; i < client->num_sysmmu; i++) {
> > + ret = pm_generic_suspend(client->sysmmu[i]);
> > + if (ret)
> > + break;
> > + }
> > +
> > + if (!ret)
> > + ret = pm_generic_suspend(dev);
> > +
> > + if (ret) {
> > + int j;
> > +
> > + for (j = 0; j < i; j++)
> > + pm_generic_resume(client->sysmmu[j]);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int sysmmu_pm_genpd_resume(struct device *dev)
> > +{
> > + struct exynos_iommu_client *client = dev->archdata.iommu;
> > + int ret = 0;
> > + int i;
> > +
> > + for (i = 0; i < client->num_sysmmu; i++) {
> > + ret = pm_generic_resume(client->sysmmu[i]);
> > + if (ret)
> > + break;
>
> Error handling here can be cleaned up a lot.
>
> s/break/goto err_suspend/
>
> > + }
> > +
> > + if (!ret)
>
> Now you can drop this check.
>
> > + ret = pm_generic_resume(dev);
>
> ret = pm_generic_resume(dev);
> if (ret)
> goto err_suspend;
>
> return 0;
>
> > +
>
> err_suspend:
> > + if (ret) {
>
> This check can be dropped here as well now.
>
Ok.
Let me think about it :)
Thank you!
KyongHo.
> > + int j;
> > +
> > + for (j = 0; j < i; j++)
> > + pm_generic_suspend(client->sysmmu[j]);
> > + }
> > +
> > + return ret;
> > +}
> > +#endif
>
> Best regards,
> Tomasz
>
More information about the linux-arm-kernel
mailing list