[PATCH 3/8] ARM: dts: mxs: add another set of saif0_pins (without MCLK)

[Lothar Waßmann]

Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
---
 arch/arm/boot/dts/imx28.dtsi |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 546fd7a..7d7f277 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -518,6 +518,18 @@
 					fsl,pull-up = <1>;
 				};
 
+				saif0_pins_b: saif0 at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
+						0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
+						0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+					>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
 				saif1_pins_a: saif1 at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-- 
1.7.2.5