[PATCH v2 2/3] ARM: dt: t114 dalmore: add dt entry for nct1008
Wei Ni
wni at nvidia.com
Thu Aug 8 02:56:30 EDT 2013
Enable thermal sensor nct1008 for t114 dalmore.
Signed-off-by: Wei Ni <wni at nvidia.com>
---
arch/arm/boot/dts/tegra114-dalmore.dts | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index b5a42f0..9d4d2b2 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -738,6 +738,14 @@
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
};
+
+ nct1008 {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+ vdd-supply = <&palmas_ldo6_reg>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+ };
};
i2c at 7000d000 {
@@ -945,7 +953,7 @@
regulator-max-microvolt = <1800000>;
};
- ldo6 {
+ palmas_ldo6_reg: ldo6 {
regulator-name = "vdd-sensor-2v85";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
--
1.7.9.5
More information about the linux-arm-kernel
mailing list