[PATCH] ARM: dts: am33xx: Correct gpio #interrupt-cells property

[Lars Poeschel]

On Wednesday 07 August 2013 at 16:53:09, Mark Rutland wrote:
> On Wed, Aug 07, 2013 at 12:06:32PM +0100, Lars Poeschel wrote:
> > From: Lars Poeschel <poeschel at lemonage.de>
> > 
> > Following commit ff5c9059 and therefore other omap platforms using
> > the gpio-omap driver correct the #interrupt-cells property on am33xx
> > too. The omap gpio binding documentaion also states that
> > the #interrupt-cells property should be 2.
> 
> I take it there are no device nodes for which any of these nodes are an
> interrupt parent (which would need to be updated)?

As far as I know: No.

Lars

> If so:
> 
> Acked-by: Mark Rutland <mark.rutland at arm.com>
> 
> Thanks,
> Mark.
> 
> > Signed-off-by: Lars Poeschel <poeschel at lemonage.de>
> > ---
> > 
> >  arch/arm/boot/dts/am33xx.dtsi |    8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/am33xx.dtsi
> > b/arch/arm/boot/dts/am33xx.dtsi index 38b446b..033c5dd 100644
> > --- a/arch/arm/boot/dts/am33xx.dtsi
> > +++ b/arch/arm/boot/dts/am33xx.dtsi
> > @@ -102,7 +102,7 @@
> > 
> >  			gpio-controller;
> >  			#gpio-cells = <2>;
> >  			interrupt-controller;
> > 
> > -			#interrupt-cells = <1>;
> > +			#interrupt-cells = <2>;
> > 
> >  			reg = <0x44e07000 0x1000>;
> >  			interrupts = <96>;
> >  		
> >  		};
> > 
> > @@ -113,7 +113,7 @@
> > 
> >  			gpio-controller;
> >  			#gpio-cells = <2>;
> >  			interrupt-controller;
> > 
> > -			#interrupt-cells = <1>;
> > +			#interrupt-cells = <2>;
> > 
> >  			reg = <0x4804c000 0x1000>;
> >  			interrupts = <98>;
> >  		
> >  		};
> > 
> > @@ -124,7 +124,7 @@
> > 
> >  			gpio-controller;
> >  			#gpio-cells = <2>;
> >  			interrupt-controller;
> > 
> > -			#interrupt-cells = <1>;
> > +			#interrupt-cells = <2>;
> > 
> >  			reg = <0x481ac000 0x1000>;
> >  			interrupts = <32>;
> >  		
> >  		};
> > 
> > @@ -135,7 +135,7 @@
> > 
> >  			gpio-controller;
> >  			#gpio-cells = <2>;
> >  			interrupt-controller;
> > 
> > -			#interrupt-cells = <1>;
> > +			#interrupt-cells = <2>;
> > 
> >  			reg = <0x481ae000 0x1000>;
> >  			interrupts = <62>;
> >  		
> >  		};