[PATCH 0/2] Add power control for lm90

Wei Ni wni at nvidia.com
Wed Aug 7 02:52:36 EDT 2013


The device lm90 can be controlled by the vdd rail.
Add function to power on/off the vdd.
Enable the nct1008 on Tegra114 Dalmore board, and set the vdd-regulator.

Wei Ni (2):
  hwmon: (lm90) Add power control
  ARM: dt: t114 dalmore: add dt entry for nct1008

 arch/arm/boot/dts/tegra114-dalmore.dts |   10 +++++-
 drivers/hwmon/lm90.c                   |   52 ++++++++++++++++++++++++++++++++
 2 files changed, 61 insertions(+), 1 deletion(-)

-- 
1.7.9.5




More information about the linux-arm-kernel mailing list