[PATCH v4 00/31] add COMMON_CLK support for PowerPC MPC512x
Gerhard Sittig
gsi at denx.de
Tue Aug 6 17:31:48 EDT 2013
[ this is an overview on how to split the series if necessary ]
On Tue, Aug 06, 2013 at 22:43 +0200, Gerhard Sittig wrote:
>
> this series
> - fixes several drivers that are used in the MPC512x platform (UART,
> SPI, ethernet, PCI, USB, CAN, NAND flash, video capture) in how they
> handle clocks (appropriately acquire and setup them, hold references
> during use, release clocks after use)
> - introduces support for the common clock framework (CCF, COMMON_CLK
> Kconfig option) in the PowerPC based MPC512x platform, which brings
> device tree based clock lookup as well
>
> although the series does touch several subsystems -- tty (serial), spi,
> net (can, fs_enet), mtd (nfc), usb, i2c, media (viu), and dts -- all of
> the patches are strictly clock related or trivial
>
> it appears most appropriate to take this series through either the clk
> or the powerpc trees after it has passed review and other subsystem
> maintainers ACKed the clock setup related driver modifications
It was suggested that the series may not be kept together when
applying, i.e. that individual patches may need to take separate
routes through individual subsystem trees.
Here is how the parts of the series interact:
- parts 01-14 are apparent fixes and improvements to existing
drivers, they may immediately get applied via their respective
subsystems when they are considered acceptable in review
(number 13 already was taken into clk-next)
- parts 15-16 are device tree improvements (providing previously
lacking information on the hardware, plus introducing support
for symbolic references in DT nodes), and can get applied
immediately via their respective subsystem
- part 17 introduces the platform clock driver which provides
common clock support (uses shared drivers and common
infrastructure, is an OF clock provider) -- this patch
introduces _and_ enables the driver which strictly depends on
the device tree update from part 16, and when common clock
support gets enabled all peripheral drivers shall have received
their clock API use cleanup
- part 18 introduces clock specs in the device tree which is used
for client side lookups (from within peripheral drivers), this
part must not get applied before the OF clock provider from
part 17
- parts 19-21 and 23-28 further adjust peripheral drivers _after_
the common clock support and OF clock lookup have become
available, they strictly depend on parts 17 and 18, finally
bring peripheral drivers into the common clock world and remove
workarounds in the backend which support migration
- parts 22 and 29-31 finally remove remaining compat and
migration stuff that has become obsolete after everything else
was adjusted (I'd happily re-spin the series to move 22 to the
end if eliminating this seemingly out-of-order item helps,
currently it's at that position since it finishes what patch 20
and 21 have prepared, while I did not dare to squash SPI and
UART related patches since they reside in different subsystems)
The above results in the following stages, when the series needs
to get split:
- parts 01-16 could be taken immediately and need not be kept in
any order, as they don't depend on each other
- parts 17-18 could be taken after 01-16 all are in place (while
18 requires 17)
- parts 19-28 (see the remark on 22) could be taken after 17 and
18 are in place (22 depends on 20 and 21 but may get moved to
any later position at will, all other parts don't depend on
each other and can get applied in any order)
- parts 29-31 (and 22 if not applied so far) could be taken after
all parts up to 28 were applied
Please consider that I'm not trying to be pushy :) but that I
want to provide all the possible help and information on how the
series might get applied, assuming that it will pass review. So
far there has not been objection, all feedback got addressed,
while explicit ACKs still are pending.
For your reference here is the stats and the (numbered) list of
files again:
0000-cover-letter.patch
0001-spi-mpc512x-cleanup-clock-API-use.patch
0002-serial-mpc512x-cleanup-clock-API-use.patch
0003-USB-fsl-mph-dr-of-cleanup-clock-API-use.patch
0004-mtd-mpc5121_nfc-cleanup-clock-API-use.patch
0005-media-fsl-viu-cleanup-clock-API-use.patch
0006-i2c-mpc-cleanup-clock-API-use.patch
0007-fs_enet-silence-a-build-warning-unused-variable.patch
0008-fs_enet-cleanup-clock-API-use.patch
0009-powerpc-fsl-pci-improve-clock-API-use.patch
0010-net-can-mscan-add-a-comment-on-reg-to-idx-mapping.patch
0011-net-can-mscan-improve-clock-API-use.patch
0012-powerpc-mpc512x-array-decl-for-MCLK-registers-in-CCM.patch
0013-clk-wrap-I-O-access-for-improved-portability.patch
0014-dts-mpc512x-prepare-for-preprocessor-support.patch
0015-dts-mpc512x-introduce-dt-bindings-clock-header.patch
0016-dts-mpc512x-add-clock-related-device-tree-specs.patch
0017-clk-mpc512x-introduce-COMMON_CLK-for-MPC512x.patch
0018-dts-mpc512x-add-clock-specs-for-client-lookups.patch
0019-clk-mpc512x-don-t-pre-enable-FEC-and-I2C-clocks.patch
0020-spi-mpc512x-switch-to-CCF-names-in-clock-lookup.patch
0021-serial-mpc512x-switch-to-CCF-names-in-clock-lookup.patch
0022-clk-mpc512x-remove-PSC-UART-SPI-compat-workarounds.patch
0023-serial-mpc512x-setup-the-PSC-FIFO-clock-as-well.patch
0024-USB-fsl-mph-dr-of-remove-now-obsolete-clock-lookup-n.patch
0025-mtd-mpc5121_nfc-remove-now-obsolete-clock-lookup-nam.patch
0026-media-fsl-viu-remove-now-obsolete-clock-lookup-name.patch
0027-net-can-mscan-add-common-clock-support-for-mpc512x.patch
0028-powerpc-mpc512x-improve-DIU-related-clock-setup.patch
0029-clk-mpc512x-switch-to-COMMON_CLK-remove-PPC_CLOCK.patch
0030-net-can-mscan-remove-non-CCF-code-for-MPC512x.patch
0031-clk-mpc512x-remove-remaining-migration-workarounds.patch
> Gerhard Sittig (31):
> spi: mpc512x: cleanup clock API use
> serial: mpc512x: cleanup clock API use
> USB: fsl-mph-dr-of: cleanup clock API use
> mtd: mpc5121_nfc: cleanup clock API use
> [media] fsl-viu: cleanup clock API use
> i2c: mpc: cleanup clock API use
> fs_enet: silence a build warning (unused variable)
> fs_enet: cleanup clock API use
> powerpc/fsl-pci: improve clock API use
> net: can: mscan: add a comment on reg to idx mapping
> net: can: mscan: improve clock API use
> powerpc: mpc512x: array decl for MCLK registers in CCM
> clk: wrap I/O access for improved portability
> dts: mpc512x: prepare for preprocessor support
> dts: mpc512x: introduce dt-bindings/clock/ header
> dts: mpc512x: add clock related device tree specs
> clk: mpc512x: introduce COMMON_CLK for MPC512x
> dts: mpc512x: add clock specs for client lookups
> clk: mpc512x: don't pre-enable FEC and I2C clocks
> spi: mpc512x: switch to CCF names in clock lookup
> serial: mpc512x: switch to CCF names in clock lookup
> clk: mpc512x: remove PSC (UART, SPI) compat workarounds
> serial: mpc512x: setup the PSC FIFO clock as well
> USB: fsl-mph-dr-of: remove now obsolete clock lookup name
> mtd: mpc5121_nfc: remove now obsolete clock lookup name
> [media] fsl-viu: remove now obsolete clock lookup name
> net: can: mscan: add common clock support for mpc512x
> powerpc/mpc512x: improve DIU related clock setup
> clk: mpc512x: switch to COMMON_CLK, remove PPC_CLOCK
> net: can: mscan: remove non-CCF code for MPC512x
> clk: mpc512x: remove remaining migration workarounds
>
> arch/powerpc/boot/dts/ac14xx.dts | 9 +-
> arch/powerpc/boot/dts/include/dt-bindings | 1 +
> arch/powerpc/boot/dts/mpc5121.dtsi | 110 ++-
> arch/powerpc/boot/dts/mpc5121ads.dts | 2 +-
> arch/powerpc/boot/dts/pdm360ng.dts | 2 +-
> arch/powerpc/include/asm/mpc5121.h | 18 +-
> arch/powerpc/platforms/512x/Kconfig | 2 +-
> arch/powerpc/platforms/512x/Makefile | 3 +-
> arch/powerpc/platforms/512x/clock-commonclk.c | 716 +++++++++++++++++++
> arch/powerpc/platforms/512x/clock.c | 753 --------------------
> arch/powerpc/platforms/512x/mpc512x_shared.c | 165 +++--
> arch/powerpc/sysdev/fsl_pci.c | 22 +
> drivers/clk/clk-divider.c | 6 +-
> drivers/clk/clk-gate.c | 6 +-
> drivers/clk/clk-mux.c | 6 +-
> drivers/i2c/busses/i2c-mpc.c | 24 +
> drivers/media/platform/fsl-viu.c | 23 +-
> drivers/mtd/nand/mpc5121_nfc.c | 21 +-
> drivers/net/can/mscan/mpc5xxx_can.c | 281 +++++---
> drivers/net/can/mscan/mscan.c | 27 +-
> drivers/net/can/mscan/mscan.h | 3 +
> .../net/ethernet/freescale/fs_enet/fs_enet-main.c | 21 +-
> drivers/spi/spi-mpc512x-psc.c | 60 +-
> drivers/tty/serial/mpc52xx_uart.c | 179 ++++-
> drivers/usb/host/fsl-mph-dr-of.c | 27 +-
> include/dt-bindings/clock/mpc512x-clock.h | 69 ++
> include/linux/clk-provider.h | 33 +
> include/linux/fs_enet_pd.h | 3 +
> 28 files changed, 1534 insertions(+), 1058 deletions(-)
> create mode 120000 arch/powerpc/boot/dts/include/dt-bindings
> create mode 100644 arch/powerpc/platforms/512x/clock-commonclk.c
> delete mode 100644 arch/powerpc/platforms/512x/clock.c
> create mode 100644 include/dt-bindings/clock/mpc512x-clock.h
virtually yours
Gerhard Sittig
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr. 5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
More information about the linux-arm-kernel
mailing list