[PATCH 1/2] ARM: msm: Add support for MSM8974 Dragonboard

[Kumar Gala]

On Aug 6, 2013, at 1:28 PM, Rohit Vaswani wrote:

> On 8/6/2013 8:47 AM, Kumar Gala wrote:
>> On Aug 5, 2013, at 6:02 PM, Rohit Vaswani wrote:
>> 
>>> This patch adds basic board support for MSM8974 Dragonboard
>>> which belongs to the Snapdragon 800 family.
>>> For now, just support a basic machine with device tree.
>> I think the board is APQ8074 and not MSM8974.
>> 
>>> Signed-off-by: Rohit Vaswani <rvaswani at codeaurora.org>
>>> ---
>>> arch/arm/boot/dts/Makefile        |  3 ++-
>>> arch/arm/boot/dts/msm8974-db.dts  | 26 ++++++++++++++++++++++++++
>>> arch/arm/mach-msm/Kconfig         | 21 ++++++++++++++++++---
>>> arch/arm/mach-msm/Makefile        |  1 +
>>> arch/arm/mach-msm/board-dt-8974.c | 23 +++++++++++++++++++++++
>>> 5 files changed, 70 insertions(+), 4 deletions(-)
>>> create mode 100644 arch/arm/boot/dts/msm8974-db.dts
>>> create mode 100644 arch/arm/mach-msm/board-dt-8974.c
>>> 
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index 641b3c9a..62cea36 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -97,7 +97,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
>>> 	kirkwood-openblocks_a6.dtb
>>> dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
>>> dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
>>> -	msm8960-cdp.dtb
>>> +	msm8960-cdp.dtb \
>>> +	msm8974-db.dtb
>>> dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
>>> 	armada-370-mirabox.dtb \
>>> 	armada-370-rd.dtb \
>>> diff --git a/arch/arm/boot/dts/msm8974-db.dts b/arch/arm/boot/dts/msm8974-db.dts
>>> new file mode 100644
>>> index 0000000..badfc61
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/msm8974-db.dts
>>> @@ -0,0 +1,26 @@
>>> +/dts-v1/;
>>> +
>>> +/include/ "skeleton.dtsi"
>> We should change msm8974.dts to msm8974.dtsi and include it for the board.
> 
> We can do that once we have something separate/new to add to the dtsi file.

Why wait, we should just do this to start with.  Even if the msm8974-db.dts is just:

/include/ "msm8974.dtsi"

{
	model = "Qualcomm MSM8974 Dragonboard";
	compatible = "qcom,msm8974-db", "qcom,msm8974";
}

Plus, we can do things like "disable" additional cores or such in the board.dts and have the SoC one have all 4 cores, etc in it.

- k

--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation