[PATCH v3 9/9] ARM: DRA7: Add the build support in omap2plus
Rajendra Nayak
rnayak at ti.com
Sun Aug 4 12:27:37 EDT 2013
From: R Sricharan <r.sricharan at ti.com>
Now that the needed pieces for DRA7 based SoCs' is present, enable
the build support in omap2plus_defconfig
Signed-off-by: R Sricharan <r.sricharan at ti.com>
Signed-off-by: Rajendra Nayak <rnayak at ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
---
arch/arm/configs/omap2plus_defconfig | 1 +
arch/arm/mach-omap2/Kconfig | 10 +++++++++-
arch/arm/plat-omap/Kconfig | 2 +-
3 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 5339e6a..1da7cf9 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -306,3 +306,4 @@ CONFIG_TI_DAVINCI_MDIO=y
CONFIG_TI_DAVINCI_CPDMA=y
CONFIG_TI_CPSW=y
CONFIG_AT803X_PHY=y
+CONFIG_SOC_DRA7XX=y
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index fc6ec23..740f41b 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -118,7 +118,7 @@ config ARCH_OMAP2PLUS_TYPICAL
select I2C
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
- select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+ select NEON if CPU_V7
select PM_RUNTIME
select REGULATOR
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
@@ -135,6 +135,14 @@ config SOC_HAS_REALTIME_COUNTER
depends on SOC_OMAP5 || SOC_DRA7XX
default y
+config SOC_DRA7XX
+ bool "TI DRA7XX"
+ select ARM_ARCH_TIMER
+ select CPU_V7
+ select ARM_GIC
+ select HAVE_SMP
+ select COMMON_CLK
+
comment "OMAP Core Type"
depends on ARCH_OMAP2
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index f82bae2..436ea97 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -106,7 +106,7 @@ config OMAP_32K_TIMER
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
- currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5.
+ currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
On OMAP2PLUS this value is only used for CONFIG_HZ and
CLOCK_TICK_RATE compile time calculation.
--
1.7.9.5
More information about the linux-arm-kernel
mailing list