[PATCH v2 0/8] DRA7xx core support

[Rajendra Nayak]

On Saturday 03 August 2013 03:58 AM, Santosh Shilimkar wrote:
> On Tuesday 30 July 2013 07:25 AM, Rajendra Nayak wrote:
>> Changes in v2:
>> -1- Fixed minor changelog details
>> -2- Dropped the SRAM support patch since we need to move to drivers/misc/sram.c
>> -3- Added DTS update patches to this series which were earlier posted as
>> part of the data series (Since they don't have much objections as against the
>> other in-kernel data files)
>> -4- Updated the EVM dts file with pin config details for uart/mcspi and i2c
>>
>> DRA7xx based SoCs' are high-performance, infotainment application devices,
>> based on enhanced OMAP architecture integrated on a 28nm
>> technology.
>>
>> The DRA7xx family is composed of DRA75x and DRA74x devices.
>> The current device for which the patches add support is the
>> DRA752 SoC.
>>
>> Most of the core IPs are similar to those found on the OMAP5
>> devices, including the dual cortex-A15 based MPU subsystem,
>> which has helped quite some reuse from existing OMAP5 support.
>>
>> This series contains only core support patches and none of
>> the PRCM and hwmod data needed for the device to boot.
>>
>> The bootloader support for the platform is already available
>> in mainline u-boot.
>>
>> The patches posted in this series are available at:
>> git://github.com/rrnayak/linux.git for-3.12/dra-core-v2
>>
>> The patches (including the ones for in-kernel data) which boot
>> on dra7xx evm are available at:
>> t://github.com/rrnayak/linux.git out-of-tree/dra-integrated-v2
>>
>> R Sricharan (7):
>>   ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
>>   ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra
>>   ARM: DRA7: Reuse io tables and add a new .init_early
>>   ARM: DRA7: Resue the clocksource, clockevent support
>>   ARM: DRA7: board-generic: Add basic DT support
>>   ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512
>>   ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
>>
>> Rajendra Nayak (1):
>>   ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5
>>
> I quickly scanned the series and largely it looks good to me.
> The suggestion on dts and soc_id seems to be the valid ones and good
> to address them. Feel free to add my ack when you respin the series
> with those couple of issues addressed.

Thanks, will do.

> 
> Regards,
> Santosh
> 
> 
>