[PATCH 3/5] gpio: pxa: Documentation: provide example bindings for PXA3xx

[Haojian Zhuang]

On Thu, Jul 11, 2013 at 11:17 PM, Daniel Mack <zonque at gmail.com> wrote:
> Add another example to describe bindings that work for PXA3xx boards.
>
> Signed-off-by: Daniel Mack <zonque at gmail.com>
> ---
>  Documentation/devicetree/bindings/gpio/mrvl-gpio.txt | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
> index 6641626..b2afdb2 100644
> --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
> +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
> @@ -19,7 +19,7 @@ Required properties:
>  - gpio-controller : Marks the device node as a gpio controller.
>  - #gpio-cells : Should be one.  It is the pin number.
>
> -Example:
> +Example for a MMP platform:
>
>         gpio: gpio at d4019000 {
>                 compatible = "marvell,mmp-gpio";
> @@ -32,6 +32,19 @@ Example:
>                 #interrupt-cells = <1>;
>        };
>
> +Example for a PXA3xx platform:
> +
> +       gpio: gpio at 40e00000 {
> +               compatible = "intel,pxa3xx-gpio";
> +               reg = <0x40e00000 0x10000>;
> +               interrupt-names = "gpio0", "gpio1", "gpio_mux";
> +               interrupts = <8 9 10>;
> +               gpio-controller;
> +               #gpio-cells = <0x2>;
> +               interrupt-controller;
> +               #interrupt-cells = <0x2>;
> +       };
> +
>  * Marvell Orion GPIO Controller
>
>  Required properties:
> --
> 1.8.1.4
>
>

Acked-by: Haojian Zhuang <haojian.zhuang at gmail.com>