[PATCH RESEND 1/2] ARM: dts: vf610-twr: enable i2c0 device

[Shawn Guo]

On Fri, Aug 02, 2013 at 12:44:07PM +0800, Jingchang Lu wrote:
> enable i2c0 device on Vybrid VF610 Tower Board
> 
> Signed-off-by: Jingchang Lu <b35083 at freescale.com>

I suggest you send me the patch after the driver part gets accepted by
subsystem maintainer.

Shawn

> ---
>  arch/arm/boot/dts/vf610-twr.dts | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
> index b3905f5..1a58678 100644
> --- a/arch/arm/boot/dts/vf610-twr.dts
> +++ b/arch/arm/boot/dts/vf610-twr.dts
> @@ -50,6 +50,13 @@
>  	status = "okay";
>  };
>  
> +&i2c0 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c0_1>;
> +	status = "okay";
> +};
> +
>  &uart1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_uart1_1>;
> -- 
> 1.8.0
> 
>