[PATCH v14 01/12] usb: chipidea: move vbus regulator operation to core
Peter Chen
peter.chen at freescale.com
Fri Aug 2 04:33:54 EDT 2013
The vbus regulator is a common element for USB vbus operation,
So, move it from glue layer to core.
Tested-by: Marek Vasut <marex at denx.de>
Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
Signed-off-by: Peter Chen <peter.chen at freescale.com>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 26 ++------------------------
drivers/usb/chipidea/core.c | 23 +++++++++++++++++++++++
include/linux/usb/chipidea.h | 1 +
3 files changed, 26 insertions(+), 24 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index e04611f..b886998 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -19,7 +19,6 @@
#include <linux/dma-mapping.h>
#include <linux/usb/chipidea.h>
#include <linux/clk.h>
-#include <linux/regulator/consumer.h>
#include "ci.h"
#include "ci_hdrc_imx.h"
@@ -31,7 +30,6 @@ struct ci_hdrc_imx_data {
struct usb_phy *phy;
struct platform_device *ci_pdev;
struct clk *clk;
- struct regulator *reg_vbus;
};
static const struct usbmisc_ops *usbmisc_ops;
@@ -134,20 +132,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
goto err_clk;
}
- /* we only support host now, so enable vbus here */
- data->reg_vbus = devm_regulator_get(&pdev->dev, "vbus");
- if (!IS_ERR(data->reg_vbus)) {
- ret = regulator_enable(data->reg_vbus);
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to enable vbus regulator, err=%d\n",
- ret);
- goto err_clk;
- }
- } else {
- data->reg_vbus = NULL;
- }
-
pdata.phy = data->phy;
if (!pdev->dev.dma_mask)
@@ -160,7 +144,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev,
"usbmisc init failed, ret=%d\n", ret);
- goto err;
+ goto err_clk;
}
}
@@ -172,7 +156,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"Can't register ci_hdrc platform device, err=%d\n",
ret);
- goto err;
+ goto err_clk;
}
if (usbmisc_ops && usbmisc_ops->post) {
@@ -193,9 +177,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
disable_device:
ci_hdrc_remove_device(data->ci_pdev);
-err:
- if (data->reg_vbus)
- regulator_disable(data->reg_vbus);
err_clk:
clk_disable_unprepare(data->clk);
return ret;
@@ -208,9 +189,6 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
ci_hdrc_remove_device(data->ci_pdev);
- if (data->reg_vbus)
- regulator_disable(data->reg_vbus);
-
if (data->phy)
usb_phy_shutdown(data->phy);
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 3126c03..26f6599 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -65,6 +65,7 @@
#include <linux/usb/chipidea.h>
#include <linux/usb/of.h>
#include <linux/phy.h>
+#include <linux/regulator/consumer.h>
#include "ci.h"
#include "udc.h"
@@ -342,6 +343,24 @@ static irqreturn_t ci_irq(int irq, void *data)
return ret;
}
+static int ci_get_platdata(struct device *dev,
+ struct ci_hdrc_platform_data *platdata)
+{
+ /* Get the vbus regulator */
+ platdata->reg_vbus = devm_regulator_get(dev, "vbus");
+ if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
+ platdata->reg_vbus = NULL; /* no vbus regualator is needed */
+ } else if (IS_ERR(platdata->reg_vbus)) {
+ dev_err(dev, "Getting regulator error: %ld\n",
+ PTR_ERR(platdata->reg_vbus));
+ return PTR_ERR(platdata->reg_vbus);
+ }
+
+ return 0;
+}
+
static DEFINE_IDA(ci_ida);
struct platform_device *ci_hdrc_add_device(struct device *dev,
@@ -351,6 +370,10 @@ struct platform_device *ci_hdrc_add_device(struct device *dev,
struct platform_device *pdev;
int id, ret;
+ ret = ci_get_platdata(dev, platdata);
+ if (ret)
+ return ERR_PTR(ret);
+
id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
if (id < 0)
return ERR_PTR(id);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 2562994..ce4e1aa 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -24,6 +24,7 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
void (*notify_event) (struct ci_hdrc *ci, unsigned event);
+ struct regulator *reg_vbus;
};
/* Default offset of capability registers */
--
1.7.0.4
More information about the linux-arm-kernel
mailing list