[PATCH v3 2/2] i2c: imx: Add Vybrid VF610 I2C controller support
Jingchang Lu
b35083 at freescale.com
Fri Aug 2 00:44:08 EDT 2013
Add Freescale Vybrid VF610 I2C controller support to
imx I2C driver framework.
Some operation is different from imx I2C controller.
The register offset, the i2c clock divider value table,
the module enabling(I2CR_IEN) which is just invert with imx,
and the interrupt flag(I2SR) clearing opcode is w1c on VF610
but w0c on imx.
Signed-off-by: Jason Jin <Jason.jin at freescale.com>
Signed-off-by: Xiaochun Li <b41219 at freescale.com>
Signed-off-by: Jingchang Lu <b35083 at freescale.com>
---
changes in v3:
Using struct naming the i2c clock {div, regval} pair.
Using address shift handling registers address difference.
changes in v2:
Fix building section mismatch(es) warning.
drivers/i2c/busses/i2c-imx.c | 146 ++++++++++++++++++++++++++++++++++++-------
1 file changed, 122 insertions(+), 24 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index e242797..8f9981c 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -30,6 +30,8 @@
* Copyright (C) 2007 RightHand Technologies, Inc.
* Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
*/
/** Includes *******************************************************************
@@ -62,13 +64,6 @@
/* Default value */
#define IMX_I2C_BIT_RATE 100000 /* 100kHz */
-/* IMX I2C registers */
-#define IMX_I2C_IADR 0x00 /* i2c slave address */
-#define IMX_I2C_IFDR 0x04 /* i2c frequency divider */
-#define IMX_I2C_I2CR 0x08 /* i2c control */
-#define IMX_I2C_I2SR 0x0C /* i2c status */
-#define IMX_I2C_I2DR 0x10 /* i2c transfer data */
-
/* Bits of IMX I2C registers */
#define I2SR_RXAK 0x01
#define I2SR_IIF 0x02
@@ -95,8 +90,12 @@
*
* Duplicated divider values removed from list
*/
+struct imx_i2c_clk_pair {
+ u16 div;
+ u16 regval;
+};
-static u16 __initdata i2c_clk_div[50][2] = {
+static struct imx_i2c_clk_pair imx_i2c_clk_div[] = {
{ 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 },
{ 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 },
{ 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 },
@@ -112,11 +111,63 @@ static u16 __initdata i2c_clk_div[50][2] = {
{ 3072, 0x1E }, { 3840, 0x1F }
};
+/* Vybrid VF610 clock divider, register value pairs */
+static struct imx_i2c_clk_pair vf610_i2c_clk_div[] = {
+ { 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 },
+ { 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 },
+ { 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D },
+ { 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 },
+ { 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 },
+ { 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 },
+ { 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 },
+ { 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 },
+ { 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 },
+ { 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B },
+ { 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 },
+ { 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 },
+ { 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
+ { 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
+ { 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
+};
+
enum imx_i2c_type {
IMX1_I2C,
IMX21_I2C,
+ VF610_I2C,
};
+struct imx_i2c_hwdata {
+ unsigned regshift;
+ struct imx_i2c_clk_pair *clk_div;
+ unsigned ndivs;
+ unsigned i2sr_clr_opcode;
+ unsigned i2cr_ien_opcode;
+};
+
+struct imx_i2c_drvdata {
+ enum imx_i2c_type devtype;
+ struct imx_i2c_hwdata *hwdata;
+};
+
+#define IMX_I2C_IADR (0x00 << i2c_imx->i2c_hwdata->regshift)
+#define IMX_I2C_IFDR (0x01 << i2c_imx->i2c_hwdata->regshift)
+#define IMX_I2C_I2CR (0x02 << i2c_imx->i2c_hwdata->regshift)
+#define IMX_I2C_I2SR (0x03 << i2c_imx->i2c_hwdata->regshift)
+#define IMX_I2C_I2DR (0x04 << i2c_imx->i2c_hwdata->regshift)
+
+/*
+ * Interrupt flags clear operation differ between SoCs:
+ * - write zero to clear(w0c) INT flag on I.MX,
+ * - but write one to clear(w1c) INT flag on Vybrid.
+ * I2C module enable operation also differ bteween SoCs:
+ * - set I2CR_IEN bit enable the module on I.MX,
+ * - but clear I2CR_IEN bit enable the module on Vybrid.
+ */
+#define I2SR_CLR_OPCODE_W0C 0x0
+#define I2SR_CLR_OPCODE_W1C (I2SR_IAL | I2SR_IIF)
+#define I2CR_IEN_OPCODE_0 0x0
+#define I2CR_IEN_OPCODE_1 I2CR_IEN
+
struct imx_i2c_struct {
struct i2c_adapter adapter;
struct clk *clk;
@@ -127,15 +178,52 @@ struct imx_i2c_struct {
int stopped;
unsigned int ifdr; /* IMX_I2C_IFDR */
enum imx_i2c_type devtype;
+ struct imx_i2c_hwdata *i2c_hwdata;
+};
+
+static struct imx_i2c_hwdata imx_i2c_hwdata = {
+ .regshift = 2,
+ .clk_div = imx_i2c_clk_div,
+ .ndivs = ARRAY_SIZE(imx_i2c_clk_div),
+ .i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C,
+ .i2cr_ien_opcode = I2CR_IEN_OPCODE_1,
+
+};
+
+static struct imx_i2c_hwdata vf610_i2c_hwdata = {
+ .regshift = 0,
+ .clk_div = vf610_i2c_clk_div,
+ .ndivs = ARRAY_SIZE(vf610_i2c_clk_div),
+ .i2sr_clr_opcode = I2SR_CLR_OPCODE_W1C,
+ .i2cr_ien_opcode = I2CR_IEN_OPCODE_0,
+
+};
+
+static struct imx_i2c_drvdata imx_i2c_drvdata[] = {
+ [IMX1_I2C] = {
+ .devtype = IMX1_I2C,
+ .hwdata = &imx_i2c_hwdata
+ },
+ [IMX21_I2C] = {
+ .devtype = IMX21_I2C,
+ .hwdata = &imx_i2c_hwdata
+ },
+ [VF610_I2C] = {
+ .devtype = VF610_I2C,
+ .hwdata = &vf610_i2c_hwdata
+ },
};
static struct platform_device_id imx_i2c_devtype[] = {
{
.name = "imx1-i2c",
- .driver_data = IMX1_I2C,
+ .driver_data = (kernel_ulong_t)&imx_i2c_drvdata[IMX1_I2C],
}, {
.name = "imx21-i2c",
- .driver_data = IMX21_I2C,
+ .driver_data = (kernel_ulong_t)&imx_i2c_drvdata[IMX21_I2C],
+ }, {
+ .name = "vf610-i2c",
+ .driver_data = (kernel_ulong_t)&imx_i2c_drvdata[VF610_I2C],
}, {
/* sentinel */
}
@@ -145,6 +233,7 @@ MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
static const struct of_device_id i2c_imx_dt_ids[] = {
{ .compatible = "fsl,imx1-i2c", .data = &imx_i2c_devtype[IMX1_I2C], },
{ .compatible = "fsl,imx21-i2c", .data = &imx_i2c_devtype[IMX21_I2C], },
+ { .compatible = "fsl,vf610-i2c", .data = &imx_i2c_devtype[VF610_I2C], },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
@@ -215,9 +304,8 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
clk_prepare_enable(i2c_imx->clk);
writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR);
/* Enable I2C controller */
- writeb(0, i2c_imx->base + IMX_I2C_I2SR);
- writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR);
-
+ writeb(i2c_imx->i2c_hwdata->i2sr_clr_opcode, i2c_imx->base + IMX_I2C_I2SR);
+ writeb(i2c_imx->i2c_hwdata->i2cr_ien_opcode, i2c_imx->base + IMX_I2C_I2CR);
/* Wait controller to be stable */
udelay(50);
@@ -260,7 +348,8 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
}
/* Disable I2C controller */
- writeb(0, i2c_imx->base + IMX_I2C_I2CR);
+ writeb(i2c_imx->i2c_hwdata->i2cr_ien_opcode ^ I2CR_IEN,
+ i2c_imx->base + IMX_I2C_I2CR);
clk_disable_unprepare(i2c_imx->clk);
}
@@ -270,19 +359,20 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
unsigned int i2c_clk_rate;
unsigned int div;
int i;
+ struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->i2c_hwdata->clk_div;
/* Divider value calculation */
i2c_clk_rate = clk_get_rate(i2c_imx->clk);
div = (i2c_clk_rate + rate - 1) / rate;
- if (div < i2c_clk_div[0][0])
+ if (div < i2c_clk_div[0].div)
i = 0;
- else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0])
- i = ARRAY_SIZE(i2c_clk_div) - 1;
+ else if (div > i2c_clk_div[i2c_imx->i2c_hwdata->ndivs - 1].div)
+ i = i2c_imx->i2c_hwdata->ndivs - 1;
else
- for (i = 0; i2c_clk_div[i][0] < div; i++);
+ for (i = 0; i2c_clk_div[i].div < div; i++);
/* Store divider value */
- i2c_imx->ifdr = i2c_clk_div[i][1];
+ i2c_imx->ifdr = i2c_clk_div[i].regval;
/*
* There dummy delay is calculated.
@@ -290,7 +380,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
* This delay is used in I2C bus disable function
* to fix chip hardware bug.
*/
- i2c_imx->disable_delay = (500000U * i2c_clk_div[i][0]
+ i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div
+ (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2);
/* dev_dbg() can't be used, because adapter is not yet registered */
@@ -298,7 +388,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n",
__func__, i2c_clk_rate, div);
dev_dbg(&i2c_imx->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n",
- __func__, i2c_clk_div[i][1], i2c_clk_div[i][0]);
+ __func__, i2c_clk_div[i].regval, i2c_clk_div[i].div);
#endif
}
@@ -312,6 +402,7 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
/* save status register */
i2c_imx->i2csr = temp;
temp &= ~I2SR_IIF;
+ temp |= (i2c_imx->i2c_hwdata->i2sr_clr_opcode & I2SR_IIF);
writeb(temp, i2c_imx->base + IMX_I2C_I2SR);
wake_up(&i2c_imx->queue);
return IRQ_HANDLED;
@@ -493,6 +584,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
struct imx_i2c_struct *i2c_imx;
struct resource *res;
struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
+ struct imx_i2c_drvdata *drvdata;
void __iomem *base;
int irq, ret;
u32 bitrate;
@@ -519,7 +611,9 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
if (of_id)
pdev->id_entry = of_id->data;
- i2c_imx->devtype = pdev->id_entry->driver_data;
+ drvdata = (struct imx_i2c_drvdata *)pdev->id_entry->driver_data;
+ i2c_imx->devtype = drvdata->devtype;
+ i2c_imx->i2c_hwdata = drvdata->hwdata;
/* Setup i2c_imx driver structure */
strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
@@ -560,8 +654,12 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
i2c_imx_set_clk(i2c_imx, bitrate);
/* Set up chip registers to defaults */
- writeb(0, i2c_imx->base + IMX_I2C_I2CR);
- writeb(0, i2c_imx->base + IMX_I2C_I2SR);
+ clk_prepare_enable(i2c_imx->clk);
+ writeb(i2c_imx->i2c_hwdata->i2cr_ien_opcode ^ I2CR_IEN,
+ i2c_imx->base + IMX_I2C_I2CR);
+ writeb(i2c_imx->i2c_hwdata->i2sr_clr_opcode,
+ i2c_imx->base + IMX_I2C_I2SR);
+ clk_disable_unprepare(i2c_imx->clk);
/* Add I2C adapter */
ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
--
1.8.0
More information about the linux-arm-kernel
mailing list