[PATCH 8/9] ARM: kirkwood: remove unused common code for LaCie platforms

[Thomas Petazzoni]

Now that all LaCie platforms have been converted to use the Device
Tree, we can get rid of the lacie_v2-common.{c,h} files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 arch/arm/mach-kirkwood/lacie_v2-common.c | 114 -------------------------------
 arch/arm/mach-kirkwood/lacie_v2-common.h |  16 -----
 2 files changed, 130 deletions(-)
 delete mode 100644 arch/arm/mach-kirkwood/lacie_v2-common.c
 delete mode 100644 arch/arm/mach-kirkwood/lacie_v2-common.h

diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
deleted file mode 100644
index 4894959..0000000
--- a/arch/arm/mach-kirkwood/lacie_v2-common.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/lacie_v2-common.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/gpio.h>
-#include <asm/mach/time.h>
-#include <mach/kirkwood.h>
-#include <mach/irqs.h>
-#include <plat/time.h>
-#include "common.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition lacie_v2_flash_parts[] = {
-	{
-		.name = "u-boot",
-		.size = MTDPART_SIZ_FULL,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE, /* force read-only */
-	},
-};
-
-static const struct flash_platform_data lacie_v2_flash = {
-	.type		= "mx25l4005a",
-	.name		= "spi_flash",
-	.parts		= lacie_v2_flash_parts,
-	.nr_parts	= ARRAY_SIZE(lacie_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &lacie_v2_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
-
-void __init lacie_v2_register_flash(void)
-{
-	spi_register_board_info(lacie_v2_spi_slave_info,
-				ARRAY_SIZE(lacie_v2_spi_slave_info));
-	kirkwood_spi_init();
-}
-
-/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
-	.byte_len	= SZ_4K / 8,
-	.page_size	= 16,
-};
-
-/*
- * i2c addr | chip         | description
- * 0x50     | HT24LC04     | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
-	{
-		I2C_BOARD_INFO("24c04", 0x50),
-		.platform_data  = &at24c04,
-	}
-};
-
-void __init lacie_v2_register_i2c_devices(void)
-{
-	kirkwood_i2c_init();
-	i2c_register_board_info(0, lacie_v2_i2c_info,
-				ARRAY_SIZE(lacie_v2_i2c_info));
-}
-
-/*****************************************************************************
- * Hard Disk power
- ****************************************************************************/
-
-static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
-
-void __init lacie_v2_hdd_power_init(int hdd_num)
-{
-	int i;
-	int err;
-
-	/* Power up all hard disks. */
-	for (i = 0; i < hdd_num; i++) {
-		err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
-		if (err == 0) {
-			err = gpio_direction_output(
-					lacie_v2_gpio_hdd_power[i], 1);
-			/* Free the HDD power GPIOs. This allow user-space to
-			 * configure them via the gpiolib sysfs interface. */
-			gpio_free(lacie_v2_gpio_hdd_power[i]);
-		}
-		if (err)
-			pr_err("Failed to power up HDD%d\n", i + 1);
-	}
-}
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
deleted file mode 100644
index fc64f57..0000000
--- a/arch/arm/mach-kirkwood/lacie_v2-common.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/lacie_v2-common.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
-#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
-
-void lacie_v2_register_flash(void);
-void lacie_v2_register_i2c_devices(void);
-void lacie_v2_hdd_power_init(int hdd_num);
-
-#endif
-- 
1.8.1.2