[PATCH] ARM: exynos: dts: cros5250: add EC device
Olof Johansson
olof at lixom.net
Fri Apr 26 19:42:25 EDT 2013
Add basic EC information to device tree, currently only describing the
keyboard and keymap.
Signed-off-by: Olof Johansson <olof at lixom.net>
Cc: Doug Anderson <dianders at chromium.org>
---
Kukjin, I'll apply this too directly if you don't mind.
-Olof
arch/arm/boot/dts/cros5250-common.dtsi | 99 +++++++++++++++++++++++++++++++++-
1 file changed, 98 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index 8a5b3a6..ebfa805 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -193,7 +193,104 @@
};
i2c at 12CA0000 {
- status = "disabled";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ ec: embedded-controller {
+ compatible = "google,cros-ec-i2c";
+ reg = <0x1e>;
+ interrupts = <6 0>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+
+ cros-ec-keyb {
+ compatible = "google,cros-ec-keyb";
+ keypad,num-rows = <8>;
+ keypad,num-columns = <13>;
+ google,needs-ghost-filter;
+ linux,keymap = <0x0001003a /* CAPSLK */
+ 0x0002003b /* F1 */
+ 0x00030030 /* B */
+ 0x00040044 /* F10 */
+ 0x00060031 /* N */
+ 0x0008000d /* = */
+ 0x000a0064 /* R_ALT */
+
+ 0x01010001 /* ESC */
+ 0x0102003e /* F4 */
+ 0x01030022 /* G */
+ 0x01040041 /* F7 */
+ 0x01060023 /* H */
+ 0x01080028 /* ' */
+ 0x01090043 /* F9 */
+ 0x010b000e /* BKSPACE */
+
+ 0x0200001d /* L_CTRL */
+ 0x0201000f /* TAB */
+ 0x0202003d /* F3 */
+ 0x02030014 /* T */
+ 0x02040040 /* F6 */
+ 0x0205001b /* ] */
+ 0x02060015 /* Y */
+ 0x02070056 /* 102ND */
+ 0x0208001a /* [ */
+ 0x02090042 /* F8 */
+
+ 0x03010029 /* GRAVE */
+ 0x0302003c /* F2 */
+ 0x03030006 /* 5 */
+ 0x0304003f /* F5 */
+ 0x03060007 /* 6 */
+ 0x0308000c /* - */
+ 0x030b002b /* \ */
+
+ 0x04000061 /* R_CTRL */
+ 0x0401001e /* A */
+ 0x04020020 /* D */
+ 0x04030021 /* F */
+ 0x0404001f /* S */
+ 0x04050025 /* K */
+ 0x04060024 /* J */
+ 0x04080027 /* ; */
+ 0x04090026 /* L */
+ 0x040b001c /* ENTER */
+
+ 0x0501002c /* Z */
+ 0x0502002e /* C */
+ 0x0503002f /* V */
+ 0x0504002d /* X */
+ 0x05050033 /* , */
+ 0x05060032 /* M */
+ 0x0507002a /* L_SHIFT */
+ 0x05080035 /* / */
+ 0x05090034 /* . */
+ 0x050B0039 /* SPACE */
+
+ 0x06010002 /* 1 */
+ 0x06020004 /* 3 */
+ 0x06030005 /* 4 */
+ 0x06040003 /* 2 */
+ 0x06050009 /* 8 */
+ 0x06060008 /* 7 */
+ 0x0608000b /* 0 */
+ 0x0609000a /* 9 */
+ 0x060a0038 /* L_ALT */
+ 0x060b006c /* DOWN */
+ 0x060c006a /* RIGHT */
+
+ 0x07010010 /* Q */
+ 0x07020012 /* E */
+ 0x07030013 /* R */
+ 0x07040011 /* W */
+ 0x07050017 /* I */
+ 0x07060016 /* U */
+ 0x07070036 /* R_SHIFT */
+ 0x07080019 /* P */
+ 0x07090018 /* O */
+ 0x070b0067 /* UP */
+ 0x070c0069>; /* LEFT */
+ };
+ };
};
i2c at 12CB0000 {
--
1.8.1.192.gc4361b8
More information about the linux-arm-kernel
mailing list