[PATCH 10/21] [SCSI] nsp32: use mdelay instead of large udelay constants

[Masanori Goto]

2013/4/25 Arnd Bergmann <arnd at arndb.de>
>
> ARM cannot handle udelay for more than 2 miliseconds, so we
> should use mdelay instead for those.
>

Singed-off-by: GOTO Masanori <gotom at debian.or.jp>

> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> Cc: GOTO Masanori <gotom at debian.or.jp>
> Cc: YOKOTA Hiroshi <yokota at netlab.is.tsukuba.ac.jp>
> Cc: "James E.J. Bottomley" <JBottomley at parallels.com>
> Cc: linux-scsi at vger.kernel.org
> ---
>  drivers/scsi/nsp32.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
> index 1e3879d..0665f9c 100644
> --- a/drivers/scsi/nsp32.c
> +++ b/drivers/scsi/nsp32.c
> @@ -2899,7 +2899,7 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data)
>          * reset SCSI bus
>          */
>         nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST);
> -       udelay(RESET_HOLD_TIME);
> +       mdelay(RESET_HOLD_TIME / 1000);
>         nsp32_write1(base, SCSI_BUS_CONTROL, 0);
>         for(i = 0; i < 5; i++) {
>                 intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */
> --
> 1.8.1.2
>