[PATCH 1/2] GPIO: clps711x: Rewrite driver for using generic GPIO code

[Russell King - ARM Linux]

On Thu, Apr 25, 2013 at 03:31:07PM +0400, Alexander Shiyan wrote:
> > On Sat, Apr 13, 2013 at 08:21:39AM +0400, Alexander Shiyan wrote:
> > > +static void __init clps711x_add_gpio(void)
> > > +{
> > > +	const struct resource clps711x_gpio0_res[] = {
> > > +		DEFINE_RES_MEM(PADR, SZ_1),
> > > +		DEFINE_RES_MEM(PADDR, SZ_1),
> > > +	};
> ...
> > Don't do this - this is incredibly wasteful.
> > 
> > C lesson 1: do not put unmodified initialised structures onto the stack.
> > 
> > What the C compiler will do with the above is exactly the same as this
> > for each structure:
> > 
> > static const struct resource private_clps711x_gpio4_res[] = {
> > 	DEFINE_RES_MEM(PEDR, SZ_1),
> > 	DEFINE_RES_MEM(PEDDR, SZ_1),
> > };
> > 
> > static void __init clps711x_add_gpio(void)
> > {
> > 	const struct resource clps711x_gpio4_res[] = private_clps711x_gpio4_res;
> > 	...
> > 
> > which will in itself be a call out to memcpy, or an inlined memcpy.  Now
> > do you see why it's wasteful?  You might as well write the thing in that
> > way to start with and safe the additional code to copy the structures.
> > 
> > The other way to do this, which will probably be far more space efficient:
> > 
> > static phys_addr_t gpio_addrs[][2] = {
> > 	{ PADR, PADDR },
> > 	{ PBDR, PBDDR },
> > ...
> > };
> > 
> > static void __init clps711x_add_gpio(void)
> > {
> > 	struct resource gpio_res[2];
> > 	unsigned i;
> > 
> > 	gpio_res[0].flags = IORESOURCE_MEM;
> > 	gpio_res[1].flags = IORESOURCE_MEM;
> > 
> > 	for (i = 0; i < ARRAY_SIZE(gpio_addrs); i++) {
> > 		gpio_res[0].start = gpio_addrs[i][0];
> > 		gpio_res[0].end = gpio_res[0].start;
> > 		gpio_res[1].start = gpio_addrs[i][1];
> > 		gpio_res[1].end = gpio_res[1].start;
> > 
> > 		platform_device_register_simple("clps711x-gpio", i,
> > 					gpio_res, ARRAY_SIZE(gpio_res));
> > 	}
> > }
> > 
> > which results in smaller storage and most probably also smaller code size
> > too.
> 
> Very strange results with this change.
> So, I add a debug output before "platform_device_register_simple" for
> print resource and in "__request_resource" for print parent.
> This is output.
> gpio 0 [mem 0x80000000] [mem 0x80000040]
> resource: root [??? 0xe3a0f000-0x00000000 flags 0xb00000]
> clps711x-gpio.0: failed to claim resource 0
> 
> The first line is seems correct. But I do not understand why
> parent is wrong here. Normally it should be as:
> resource: root [mem 0x00000000-0xffffffff].
> And it shows normal with my first version.
> Have anyone any ideas?

memset(&gpio_res, 0, sizeof(gpio_res));