[PATCH v5 01/10] ASoC: phycore-ac97: Add DT support
Markus Pargmann
mpa at pengutronix.de
Thu Apr 25 07:02:43 EDT 2013
On Thu, Apr 25, 2013 at 11:35:20AM +0800, Shawn Guo wrote:
> On Wed, Apr 24, 2013 at 09:45:40PM +0200, Sascha Hauer wrote:
> > Hi Markus,
> >
> > On Wed, Apr 24, 2013 at 04:36:30PM +0200, Markus Pargmann wrote:
> > > Add devicetree support for this audio soc fabric driver.
> > >
> > > @@ -32,8 +35,12 @@ static struct snd_soc_dai_link imx_phycore_dai_ac97[] = {
> > > .stream_name = "HiFi",
> > > .codec_dai_name = "wm9712-hifi",
> > > .codec_name = "wm9712-codec",
> > > +#ifdef CONFIG_MACH_IMX27_DT
> > > + .platform_name = "imx-fiq-pcm-audio",
> > > +#else
> > > .cpu_dai_name = "imx-ssi.0",
> > > .platform_name = "imx-fiq-pcm-audio.0",
> > > +#endif
> >
> > This doesn't work properly. Compiling the kernel with IMX27_DT enabled
> > does not necessarily mean that it also started with dt support.
> >
> Right, we should run-time check pdev->dev.of_node to see if it's a DT
> boot and set .platform_of_node rather than .platform_name if it is. But
> it's only possible with the cleanup series "ASoC: fsl: imx-pcm driver
> cleanup" I just sent being the base. I hope you can rebase your series
> on that :)
The current version of phycore-ac97.c is not a driver, it is just a late
init call. So run-time check is not possible unless I modify the old
part to be a driver and add a device to all board init functions using
ac97. (I would prefer dropping the non-DT part in this case ;) )
Yes I rebased this series onto your cleanups, looks good so far and
platform_of_node works finally.
Thanks,
Markus
>
> Shawn
>
> > Personally I am fine with removing platform based support for this
> > driver if it's too much effort to fix it properly, but we shouldn't
> > start working with ifdefs here.
> >
> > Sascha
> >
> >
> > --
> > Pengutronix e.K. | |
> > Industrial Linux Solutions | http://www.pengutronix.de/ |
> > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list