[PATCH 0/6] Davinci fbdev driver and enable it for DMx platform

[Laurent Pinchart]

Hi Prabhakar,

Thank you for the patch.

On Wednesday 24 April 2013 17:30:02 Prabhakar Lad wrote:
> From: Lad, Prabhakar <prabhakar.csengg at gmail.com>
> 
> This patch series adds an fbdev driver for Texas
> Instruments Davinci SoC.The display subsystem consists
> of OSD and VENC, with OSD supporting 2 RGb planes and
> 2 video planes.
> http://focus.ti.com/general/docs/lit/
> getliterature.tsp?literatureNumber=sprue37d&fileType=pdf
> 
> A good amount of the OSD and VENC enabling code is
> present in the kernel, and this patch series adds the
> fbdev interface.
> 
> The fbdev driver exports 4 nodes representing each
> plane to the user - from fb0 to fb3.

The obvious question is: why not a KMS driver instead ? :-)

> Lad, Prabhakar (6):
>   media: davinci: vpbe: fix checkpatch warning for CamelCase
>   media: davinci: vpbe: enable vpbe for fbdev addition
>   davinci: vpbe: add fbdev driver
>   ARM: davinci: dm355: enable fbdev driver
>   ARM: davinci: dm365: enable fbdev driver
>   ARM: davinci: dm644x: enable fbdev driver
> 
>  arch/arm/mach-davinci/dm355.c                 |   24 +-
>  arch/arm/mach-davinci/dm365.c                 |   10 +
>  arch/arm/mach-davinci/dm644x.c                |   10 +
>  drivers/media/platform/davinci/vpbe_display.c |    8 +-
>  drivers/media/platform/davinci/vpbe_osd.c     |  820 ++++++++-
>  drivers/media/platform/davinci/vpbe_venc.c    |   43 +
>  drivers/video/Kconfig                         |   12 +
>  drivers/video/Makefile                        |    1 +
>  drivers/video/davincifb.c                     | 2523 ++++++++++++++++++++++
>  drivers/video/davincifb.h                     |  194 ++
>  include/media/davinci/vpbe_osd.h              |   66 +-
>  include/media/davinci/vpbe_venc.h             |   21 +
>  12 files changed, 3702 insertions(+), 30 deletions(-)
>  create mode 100644 drivers/video/davincifb.c
>  create mode 100644 drivers/video/davincifb.h

-- 
Regards,

Laurent Pinchart