[PATCH 15/21] staging: comedi/dawboard2000: use mdelay for large delays

[Arnd Bergmann]

On ARM, it is not legal to pass values larger than 2ms into udelay(),
and mdelay() must be used instead, to avoid this build error:

ERROR: "__bad_udelay" [drivers/staging/comedi/drivers/daqboard2000.ko]
undefined!

On a related note, any use of mdelay() or large udelay() numbers should
be carefully reviewed, and replaced with msleep() or a different
implementation that does not rely on delaying the work.

Signed-off-by: Arnd Bergmann <arnd at arndb.de>
Cc: H Hartley Sweeten <hsweeten at visionengravers.com>
Cc: Ian Abbott <abbotti at mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
---
 drivers/staging/comedi/drivers/daqboard2000.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index 50b450f..b213e36 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -462,9 +462,9 @@ static void daqboard2000_resetLocalBus(struct comedi_device *dev)
 	struct daqboard2000_private *devpriv = dev->private;
 
 	writel(DAQBOARD2000_SECRLocalBusHi, devpriv->plx + 0x6c);
-	udelay(10000);
+	mdelay(10);
 	writel(DAQBOARD2000_SECRLocalBusLo, devpriv->plx + 0x6c);
-	udelay(10000);
+	mdelay(10);
 }
 
 static void daqboard2000_reloadPLX(struct comedi_device *dev)
@@ -472,11 +472,11 @@ static void daqboard2000_reloadPLX(struct comedi_device *dev)
 	struct daqboard2000_private *devpriv = dev->private;
 
 	writel(DAQBOARD2000_SECRReloadLo, devpriv->plx + 0x6c);
-	udelay(10000);
+	mdelay(10);
 	writel(DAQBOARD2000_SECRReloadHi, devpriv->plx + 0x6c);
-	udelay(10000);
+	mdelay(10);
 	writel(DAQBOARD2000_SECRReloadLo, devpriv->plx + 0x6c);
-	udelay(10000);
+	mdelay(10);
 }
 
 static void daqboard2000_pulseProgPin(struct comedi_device *dev)
@@ -484,9 +484,9 @@ static void daqboard2000_pulseProgPin(struct comedi_device *dev)
 	struct daqboard2000_private *devpriv = dev->private;
 
 	writel(DAQBOARD2000_SECRProgPinHi, devpriv->plx + 0x6c);
-	udelay(10000);
+	mdelay(10);
 	writel(DAQBOARD2000_SECRProgPinLo, devpriv->plx + 0x6c);
-	udelay(10000);	/* Not in the original code, but I like symmetry... */
+	mdelay(10);	/* Not in the original code, but I like symmetry... */
 }
 
 static int daqboard2000_pollCPLD(struct comedi_device *dev, int mask)
-- 
1.8.1.2