[PATCH 02/21] ARM: compressed/head.S: work around new binutils warning

[Arnd Bergmann]

In August 2012, Matthew Gretton-Dann checked a change into binutils
labelled "Error on obsolete & warn on deprecated registers", apparently as
part of ARMv8 support. Apparently, this was supposed to emit the message
"Warning: This coprocessor register access is deprecated in ARMv8" when
using certain mcr/mrc instructions and building for ARMv8. Unfortunately,
the message that is actually emitted appears to be '(null)', which is
less helpful in comparison.

Even more unfortunately, this is biting us on every single kernel
build with a new gas, because arch/arm/boot/compressed/head.S and some
other files in that directory are built with -march=all since kernel
commit 80cec14a8 "[ARM] Add -march=all to assembly file build in
arch/arm/boot/compressed" back in v2.6.28.

This patch reverts Russell's nice solution and replaces it with a more
complex one that sprinkles .arch statements inside of the head.S file
in functions that are executed in different architecture levels, which
seems to solve the original problem just as well, and gets rid of the
new one, too.

Without this patch, building anything results in:

arch/arm/boot/compressed/head.S: Assembler messages:
arch/arm/boot/compressed/head.S:565: Warning: (null)
arch/arm/boot/compressed/head.S:676: Warning: (null)
arch/arm/boot/compressed/head.S:698: Warning: (null)
arch/arm/boot/compressed/head.S:722: Warning: (null)
arch/arm/boot/compressed/head.S:726: Warning: (null)
arch/arm/boot/compressed/head.S:957: Warning: (null)
arch/arm/boot/compressed/head.S:996: Warning: (null)
arch/arm/boot/compressed/head.S:997: Warning: (null)
arch/arm/boot/compressed/head.S:1027: Warning: (null)
arch/arm/boot/compressed/head.S:1035: Warning: (null)
arch/arm/boot/compressed/head.S:1046: Warning: (null)
arch/arm/boot/compressed/head.S:1060: Warning: (null)
arch/arm/boot/compressed/head.S:1092: Warning: (null)
arch/arm/boot/compressed/head.S:1094: Warning: (null)
arch/arm/boot/compressed/head.S:1095: Warning: (null)
arch/arm/boot/compressed/head.S:1102: Warning: (null)
arch/arm/boot/compressed/head.S:1134: Warning: (null)

Signed-off-by: Arnd Bergmann <arnd at arndb.de>
Cc: Matthew Gretton-Dann <matthew.gretton-dann at arm.com>
Cc: Russell King <rmk+kernel at arm.linux.org.uk>
---
 arch/arm/boot/compressed/Makefile |  2 +-
 arch/arm/boot/compressed/head.S   | 12 ++++++++++++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index afed28e..27f3604 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -121,7 +121,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
 ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all -DZIMAGE
+asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
 KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fe4d9c3..3b0b21a 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -548,6 +548,7 @@ cache_on:	mov	r3, #8			@ cache_on function
  * to cover all 32bit address and cacheable and bufferable.
  */
 __armv4_mpu_cache_on:
+		.arch armv4
 		mov	r0, #0x3f		@ 4G, the whole
 		mcr	p15, 0, r0, c6, c7, 0	@ PR7 Area Setting
 		mcr 	p15, 0, r0, c6, c7, 1
@@ -655,6 +656,7 @@ ENDPROC(__setup_mmu)
 @ Enable unaligned access on v6, to allow better code generation
 @ for the decompressor C code:
 __armv6_mmu_cache_on:
+		.arch armv6
 		mrc	p15, 0, r0, c1, c0, 0	@ read SCTLR
 		bic	r0, r0, #2		@ A (no unaligned access fault)
 		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
@@ -663,11 +665,13 @@ __armv6_mmu_cache_on:
 
 __arm926ejs_mmu_cache_on:
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+		.arch armv5
 		mov	r0, #4			@ put dcache in WT mode
 		mcr	p15, 7, r0, c15, c0, 0
 #endif
 
 __armv4_mmu_cache_on:
+		.arch armv4
 		mov	r12, lr
 #ifdef CONFIG_MMU
 		mov	r6, #CB_BITS | 0x12	@ U
@@ -688,6 +692,7 @@ __armv4_mmu_cache_on:
 		mov	pc, r12
 
 __armv7_mmu_cache_on:
+		.arch armv7-a
 		mov	r12, lr
 #ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
@@ -1031,6 +1036,7 @@ cache_clean_flush:
 		mov	r3, #16
 		b	call_cache_fn
 
+		.arch armv4
 __armv4_mpu_cache_flush:
 		mov	r2, #1
 		mov	r3, #0
@@ -1056,6 +1062,7 @@ __fa526_cache_flush:
 		mov	pc, lr
 
 __armv6_mmu_cache_flush:
+		.arch armv6
 		mov	r1, #0
 		mcr	p15, 0, r1, c7, c14, 0	@ clean+invalidate D
 		mcr	p15, 0, r1, c7, c5, 0	@ invalidate I+BTB
@@ -1063,6 +1070,7 @@ __armv6_mmu_cache_flush:
 		mcr	p15, 0, r1, c7, c10, 4	@ drain WB
 		mov	pc, lr
 
+		.arch armv7-a
 __armv7_mmu_cache_flush:
 		mrc	p15, 0, r10, c0, c1, 5	@ read ID_MMFR1
 		tst	r10, #0xf << 16		@ hierarchical cache (ARMv7)
@@ -1123,6 +1131,7 @@ iflush:
 		mcr	p15, 0, r10, c7, c5, 4	@ ISB
 		mov	pc, lr
 
+		.arch armv5
 __armv5tej_mmu_cache_flush:
 1:		mrc	p15, 0, r15, c7, c14, 3	@ test,clean,invalidate D cache
 		bne	1b
@@ -1130,6 +1139,7 @@ __armv5tej_mmu_cache_flush:
 		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
 		mov	pc, lr
 
+		.arch armv4
 __armv4_mmu_cache_flush:
 		mov	r2, #64*1024		@ default: 32K dcache size (*2)
 		mov	r11, #32		@ default: 32 byte line size
@@ -1168,6 +1178,8 @@ __armv3_mpu_cache_flush:
 		mcr	p15, 0, r1, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr
 
+		.arch armv4
+
 /*
  * Various debugging routines for printing hex characters and
  * memory, which again must be relocatable.
-- 
1.8.1.2