Multiple issues with omap4 panda es in linux next

[Kishon Vijay Abraham I]

Hi Tony,

On Monday 22 April 2013 11:33 PM, Tony Lindgren wrote:
> * Kishon Vijay Abraham I <kishon at ti.com> [130422 01:46]:
>> Hi,
>>
>> On Friday 19 April 2013 10:43 PM, Tony Lindgren wrote:
>>> Hi all,
>>>
>>> Here's a list of breakage I've noticed so far while trying to
>>> use linux next on my pandaboard es. Probably similar issues exist
>>> on other boards as well.
>>>
>>> Ideally we would not have any breakage by the merge window, so
>>> let's try to get these fixed ASAP:
>>>
>>> 1. Serial console broken on panda es booting with DT
>>>
>>> The symptoms are dmesg output stopping after few lines
>>> and only continuing after pressing a key. Does not seem to
>>> happen on blaze with DT for some reason. And does not happen
>>> on panda es with legacy booting.
>>>
>>> 2. MUSB fails with legacy booting and DT on panda es
>>>
>>> With both legacy and DT booting I get something like:
>>>
>>> HS USB OTG: no transceiver configured
>>> musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
>>
>> The dt should work fine with https://patchwork.kernel.org/patch/2423061/.
>
> OK thanks for checking that.
>
>> But non-dt has got a real issue. We were using usb_bind_phy() for
>> binding the controller with the PHY (we use device names). But in
>> linux-next the device names have changed because of using
>> PLATFORM_DEVID_AUTO. We can modify the usb_bind_phy() calls to use
>> the new device names, But I suspect the device names can change
>> again. Not sure what we can do here :-(
>
> Let's do a minimal fix for v3.10. Then we'll make omap4 DT only for
> v3.11 and that problem is solved for good.

Have posted a patch https://patchwork.kernel.org/patch/2475521/ for 
getting MUSB functional in omap4 panda.

Thanks
Kishon