[PATCH 4/4] arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board

[Mark Rutland]

Hi,

I have a couple of minor comments on the dts:

> diff --git a/arch/arm64/boot/dts/storm.dtsi b/arch/arm64/boot/dts/storm.dtsi
> new file mode 100644
> index 0000000..8cab5d1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/storm.dtsi
> @@ -0,0 +1,116 @@
> +/*
> + * dts file for AppliedMicro (APM) X-Gene Storm SOC
> + *
> + * Copyright (C) 2013, Applied Micro Circuits Corporation
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +
> +/ {
> +	compatible = "apm,xgene,storm", "apm,xgene";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	cpus {
> +		#address-cells = <1>;

The reg is 64-bit, so address-cells should be 2.

> +		#size-cells = <0>;
> +
> +		cpu at 0 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";

It might be good to also have a compatible string for the X-Gene's CPU
implementation, e.g.

compatible = "apm,xgene-cpu", "arm,armv8";

> +			reg = <0x0 0x0000>;
> +			enable-method = "spin-table";
> +			cpu-release-addr = <0x1 0x0000fff8>;
> +		};
> +		cpu at 1 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0001>;
> +			enable-method = "spin-table";
> +			cpu-release-addr = <0x1 0x0000fff8>;
> +		};
> +		cpu at 2 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0100>;
> +			enable-method = "spin-table";
> +			cpu-release-addr = <0x1 0x0000fff8>;
> +		};

This should be cpu at 101 to match the reg property (and the following nodes
should be fixed up similarly).

> +		cpu at 3 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0101>;
> +			enable-method = "spin-table";
> +			cpu-release-addr = <0x1 0x0000fff8>;
> +		};
> +		cpu at 4 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0200>;
> +			enable-method = "spin-table";
> +			cpu-release-addr = <0x1 0x0000fff8>;
> +		};
> +		cpu at 5 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0201>;
> +			enable-method = "spin-table";
> +			cpu-release-addr = <0x1 0x0000fff8>;
> +		};
> +		cpu at 6 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0300>;
> +			enable-method = "spin-table";
> +			cpu-release-addr = <0x1 0x0000fff8>;
> +		};
> +		cpu at 7 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0301>;
> +			enable-method = "spin-table";
> +			cpu-release-addr = <0x1 0x0000fff8>;
> +		};
> +	};

[...]

Thanks,
Mark.