[PATCH 05/32] dmaengine: ste_dma40: Supply macros to resolve 'src' and 'dst' directions

[Vinod Koul]

On Thu, Apr 18, 2013 at 11:11:47AM +0100, Lee Jones wrote:
> There are lots of lengthy if() statements located sporadically up and
> down the driver. This simple macro should make many of them a little
> simpler to decipher. The remainder have to stay in place, as they
> detail slightly more specific settings.
I would like these to be DMAENGINE_IS_SRC... and this patch use the defines
provided in dmaengine

--
~Vinod
> 
> Cc: Vinod Koul <vinod.koul at intel.com>
> Cc: Dan Williams <djbw at fb.com>
> Cc: Per Forlin <per.forlin at stericsson.com>
> Cc: Rabin Vincent <rabin at rab.in>
> Signed-off-by: Lee Jones <lee.jones at linaro.org>
> ---
>  drivers/dma/ste_dma40.c |   38 ++++++++++++++++++++------------------
>  1 file changed, 20 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
> index e50354d..b21a8a3 100644
> --- a/drivers/dma/ste_dma40.c
> +++ b/drivers/dma/ste_dma40.c
> @@ -55,6 +55,10 @@
>  
>  #define MAX(a, b) (((a) < (b)) ? (b) : (a))
>  
> +#define D40_IS_SRC(dir)  ((dir == STEDMA40_PERIPH_TO_MEM) ? true : false)
> +#define D40_IS_DST(dir) (((dir == STEDMA40_MEM_TO_PERIPH) || \
> +			  (dir == STEDMA40_MEM_TO_MEM)) ? true : false)
> +
>  /* Reserved event lines for memcpy only. */
>  static int dma40_memcpy_channels[] = { 56, 57, 58, 59, 60 };
>  
> @@ -823,7 +827,7 @@ static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc)
>  		 * that uses linked lists.
>  		 */
>  		if (!(chan->phy_chan->use_soft_lli &&
> -			chan->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM))
> +		      D40_IS_SRC(chan->dma_cfg.dir)))
>  			curr_lcla = d40_lcla_alloc_one(chan, desc);
>  
>  		first_lcla = curr_lcla;
> @@ -1291,12 +1295,12 @@ static void d40_config_set_event(struct d40_chan *d40c,
>  	u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
>  
>  	/* Enable event line connected to device (or memcpy) */
> -	if ((d40c->dma_cfg.dir ==  STEDMA40_PERIPH_TO_MEM) ||
> +	if (D40_IS_SRC(d40c->dma_cfg.dir) ||
>  	    (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
>  		__d40_config_set_event(d40c, event_type, event,
>  				       D40_CHAN_REG_SSLNK);
>  
> -	if (d40c->dma_cfg.dir !=  STEDMA40_PERIPH_TO_MEM)
> +	if (!D40_IS_SRC(d40c->dma_cfg.dir))
>  		__d40_config_set_event(d40c, event_type, event,
>  				       D40_CHAN_REG_SDLNK);
>  }
> @@ -1762,7 +1766,7 @@ static int d40_validate_conf(struct d40_chan *d40c,
>  		res = -EINVAL;
>  	}
>  
> -	if (conf->dir == STEDMA40_PERIPH_TO_MEM &&
> +	if (D40_IS_SRC(conf->dir) &&
>  	    d40c->base->plat_data->dev_rx[conf->dev_type] == 0 &&
>  	    d40c->runtime_addr == 0) {
>  		chan_err(d40c, "Invalid RX channel address (%d)\n",
> @@ -1895,17 +1899,17 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
>  	int j;
>  	int log_num;
>  	int num_phy_chans;
> +	int dir = d40c->dma_cfg.dir;
>  	bool is_src;
>  	bool is_log = d40c->dma_cfg.mode == STEDMA40_MODE_LOGICAL;
>  
>  	phys = d40c->base->phy_res;
>  	num_phy_chans = d40c->base->num_phy_chans;
>  
> -	if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
> +	if (D40_IS_SRC(dir)) {
>  		log_num = 2 * dev_type;
>  		is_src = true;
> -	} else if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
> -		   d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
> +	} else if (D40_IS_DST(dir)) {
>  		/* dst event lines are used for logical memcpy */
>  		log_num = 2 * dev_type + 1;
>  		is_src = false;
> @@ -1916,7 +1920,7 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
>  	event_line = D40_TYPE_TO_EVENT(dev_type);
>  
>  	if (!is_log) {
> -		if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
> +		if (dir == STEDMA40_MEM_TO_MEM) {
>  			/* Find physical half channel */
>  			if (d40c->dma_cfg.use_fixed_channel) {
>  				i = d40c->dma_cfg.phy_channel;
> @@ -2053,11 +2057,10 @@ static int d40_free_dma(struct d40_chan *d40c)
>  		return -EINVAL;
>  	}
>  
> -	if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
> -	    d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM)
> -		is_src = false;
> -	else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)
> +	if (D40_IS_SRC(d40c->dma_cfg.dir))
>  		is_src = true;
> +	else if (D40_IS_DST(d40c->dma_cfg.dir))
> +		is_src = false;
>  	else {
>  		chan_err(d40c, "Unknown direction\n");
>  		return -EINVAL;
> @@ -2118,12 +2121,11 @@ static bool d40_is_paused(struct d40_chan *d40c)
>  		goto _exit;
>  	}
>  
> -	if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
> -	    d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
> -		status = readl(chanbase + D40_CHAN_REG_SDLNK);
> -	} else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
> +	if (D40_IS_SRC(d40c->dma_cfg.dir))
>  		status = readl(chanbase + D40_CHAN_REG_SSLNK);
> -	} else {
> +	else if (D40_IS_DST(d40c->dma_cfg.dir))
> +		status = readl(chanbase + D40_CHAN_REG_SDLNK);
> +	else {
>  		chan_err(d40c, "Unknown direction\n");
>  		goto _exit;
>  	}
> @@ -2394,7 +2396,7 @@ static void d40_set_prio_realtime(struct d40_chan *d40c)
>  	if (d40c->base->rev < 3)
>  		return;
>  
> -	if ((d40c->dma_cfg.dir ==  STEDMA40_PERIPH_TO_MEM) ||
> +	if (D40_IS_SRC(d40c->dma_cfg.dir) ||
>  	    (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
>  		__d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true);
>  
> -- 
> 1.7.10.4
>