[PATCH 6/8] ARM: mx5: Add LCD IPU pinctrl data

[Shawn Guo]

On Sun, Apr 21, 2013 at 11:30:06PM +0200, Marek Vasut wrote:
> This patch adds pinmux for IPU LCD 1 and IPU LVDS.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
>  arch/arm/boot/dts/imx53.dtsi |   57 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 57 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
> index 7574026..91fc8cc 100644
> --- a/arch/arm/boot/dts/imx53.dtsi
> +++ b/arch/arm/boot/dts/imx53.dtsi
> @@ -513,6 +513,63 @@
>  					};
>  				};
>  
> +				ipu_disp1 {
> +					pinctrl_ipu_disp1_1: ipudisp1grp-1 {
> +						fsl,pins = <
> +							MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
> +							MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
> +							MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
> +							MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
> +							MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
> +							MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
> +							MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
> +							MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
> +							MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
> +							MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
> +							MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
> +							MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
> +							MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
> +							MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
> +							MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
> +							MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
> +							MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
> +							MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
> +							MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
> +							MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
> +							MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
> +							MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
> +							MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
> +							MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
> +							MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
> +							MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
> +							MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
> +							MX53_PAD_EIM_DA15__IPU_DI1_PIN1	0x5
> +							MX53_PAD_EIM_DA11__IPU_DI1_PIN2	0x5
> +							MX53_PAD_EIM_DA12__IPU_DI1_PIN3	0x5
> +							MX53_PAD_EIM_A25__IPU_DI1_PIN12	0x5

I fixed the indent a little bit to have 0x5 aligned with above one.

> +							MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
> +						>;
> +					};
> +				};
> +
> +				ipu_disp2 {
> +					pinctrl_ipu_disp2_1: ipudisp2grp-1 {
> +						fsl,pins = <
> +							MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
> +							MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
> +							MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
> +							MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
> +							MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
> +
I removed this new line.

> +							MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0	0x80000000
> +							MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1	0x80000000
> +							MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2	0x80000000
> +							MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3	0x80000000
> +							MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK	0x80000000
> +						>;
> +					};
> +				};
> +

I put the nodes after i2c ones.

Shawn

>  				uart1 {
>  					pinctrl_uart1_1: uart1grp-1 {
>  						fsl,pins = <
> -- 
> 1.7.10.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel