[PATCH v3 4/4] ARM: shmobile: BOCK-W: enable USB in defconfig

[Sergei Shtylyov]

On 04/19/2013 06:14 AM, Simon Horman wrote:
> On Fri, Apr 19, 2013 at 02:50:05AM +0400, Sergei Shtylyov wrote:
>> Hello.
>>
>> On 04/18/2013 06:05 PM, Simon Horman wrote:
>>
>>>> Enable USB platform EHCI/OHCI and common PHY drivers in 'bockw_defconfig'.
>>>> Enable USB storage driver and SCSI disk driver that it needs as well...
>>>>
>>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
>>> I realise that this is not going to be useful until the rest
>>> of the series has been merged. But regardless I have pre-emptively
>>> queued it up for v3.11 in the defconfig-bockw branch.
>>>> ---
>>>>   arch/arm/configs/bockw_defconfig |   11 ++++++++++-
>>>>   1 file changed, 10 insertions(+), 1 deletion(-)
>>>>
>>>> Index: renesas/arch/arm/configs/bockw_defconfig
>>>> ===================================================================
>>>> --- renesas.orig/arch/arm/configs/bockw_defconfig
>>>> +++ renesas/arch/arm/configs/bockw_defconfig
>>>> @@ -48,6 +48,8 @@ CONFIG_DEVTMPFS_MOUNT=y
>>>>   # CONFIG_STANDALONE is not set
>>>>   # CONFIG_PREVENT_FIRMWARE_BUILD is not set
>>>>   # CONFIG_FW_LOADER is not set
>>>> +CONFIG_SCSI=y
>>>> +CONFIG_BLK_DEV_SD=y
>>>>   CONFIG_NETDEVICES=y
>>>>   # CONFIG_NET_CADENCE is not set
>>>>   # CONFIG_NET_VENDOR_BROADCOM is not set
>>>> @@ -71,7 +73,14 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6
>>>>   CONFIG_SERIAL_SH_SCI_CONSOLE=y
>>>>   # CONFIG_HW_RANDOM is not set
>>>>   # CONFIG_HWMON is not set
>>>> -# CONFIG_USB_SUPPORT is not set
>>>> +CONFIG_USB=y
>>>> +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
>>>> +CONFIG_USB_EHCI_HCD=y
>>>> +CONFIG_USB_OHCI_HCD=y
>>>> +CONFIG_USB_OHCI_HCD_PLATFORM=y
>>>> +CONFIG_USB_EHCI_HCD_PLATFORM=y
>>>> +CONFIG_USB_STORAGE=y
>>>> +CONFIG_USB_RCAR_PHY=y
>>>>
>>     Unfortunately, you've made a mistake in this last line of the patch:
>> you've truncated it to just "CONFIG_USB_RCAR". :-(
>>     Will you correct it?
> Sorry about that, I will fix it.

     Sorry to say, but you fixed it the wrong way; now it's:

+CONFIG_USB_RCAR=y

instead of:

+CONFIG_USB_RCAR_PHY=y

WBR, Sergei