[PATCH v3 2/6] ARM: at91: dts: set #dma-cells to the correct value

[ludovic.desroches at atmel.com]

From: Ludovic Desroches <ludovic.desroches at atmel.com>

Moving to generic DMA DT binding involves to set #dma-cells to 2.

Signed-off-by: Ludovic Desroches <ludovic.desroches at atmel.com>
---
 arch/arm/boot/dts/at91sam9g45.dtsi | 1 +
 arch/arm/boot/dts/at91sam9n12.dtsi | 1 +
 arch/arm/boot/dts/at91sam9x5.dtsi  | 2 ++
 arch/arm/boot/dts/sama5d3.dtsi     | 4 ++--
 4 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 6b1d4ca..275e768 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -108,6 +108,7 @@
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
 				interrupts = <21 4 0>;
+				#dma-cells = <2>;
 			};
 
 			pinctrl at fffff200 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 7750f98..acc4526 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -110,6 +110,7 @@
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
 				interrupts = <20 4 0>;
+				#dma-cells = <2>;
 			};
 
 			pinctrl at fffff400 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 3870322..8e83d87 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -104,12 +104,14 @@
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
 				interrupts = <20 4 0>;
+				#dma-cells = <2>;
 			};
 
 			dma1: dma-controller at ffffee00 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffee00 0x200>;
 				interrupts = <21 4 0>;
+				#dma-cells = <2>;
 			};
 
 			pinctrl at fffff400 {
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 39b0458..95c00a3 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -348,14 +348,14 @@
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffe600 0x200>;
 				interrupts = <30 4 0>;
-				#dma-cells = <1>;
+				#dma-cells = <2>;
 			};
 
 			dma1: dma-controller at ffffe800 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffe800 0x200>;
 				interrupts = <31 4 0>;
-				#dma-cells = <1>;
+				#dma-cells = <2>;
 			};
 
 			ramc0: ramc at ffffea00 {
-- 
1.7.11.3