[PATCH 3/5] ARM: at91/at91sam9x5.dtsi: add UART0/1 nodes

[Nicolas Ferre]

Reported-by: Douglas Gilbert <dgilbert at interlog.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
 arch/arm/boot/dts/at91sam9x5.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 58747f3..2cc33fb 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -522,6 +522,24 @@
 				status = "disabled";
 			};
 
+			uart0: serial at f8040000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8040000 0x200>;
+				interrupts = <15 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				status = "disabled";
+			};
+
+			uart1: serial at f8044000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8044000 0x200>;
+				interrupts = <16 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				status = "disabled";
+			};
+
 			adc0: adc at f804c000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xf804c000 0x100>;
-- 
1.8.0