[PATCH v2 2/2] ARM: dts: omap3-beagle-xm: Add USB host supprot for Rev. Ax/Bx

[Roger Quadros]

Rev. Ax/Bx boards have reversed polarity for USBHOST_PWR_ENable
signal when compared to Rev. C boards.

We create a new dts file for Ax/Bx boards.

Also update model and compatible flags for Rev. C board.

CC: Benoît Cousson <b-cousson at ti.com>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
 arch/arm/boot/dts/omap3-beagle-xm-ab.dts |   19 +++++++++++++++++++
 arch/arm/boot/dts/omap3-beagle-xm.dts    |    4 ++--
 2 files changed, 21 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap3-beagle-xm-ab.dts

diff --git a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts
new file mode 100644
index 0000000..041b40e
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "omap3-beagle-xm.dts"
+
+/ {
+        model = "TI OMAP3 BeagleBoard xM Rev: Ax/Bx";
+        compatible = "ti,omap3-beagle-xm-ab", "ti,omap3-beagle", "ti,omap3";
+};
+
+/* On Rev A/B USBHOST_PWR_EN is active high */
+&hsusb2_power {
+	enable-active-high;
+};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 04376a6..8a46dc5 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -10,8 +10,8 @@
 /include/ "omap36xx.dtsi"
 
 / {
-	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
+	model = "TI OMAP3 BeagleBoard xM Rev: C";
+	compatible = "ti,omap3-beagle-xm-c", "ti,omap3-beagle", "ti,omap3";
 
 	cpus {
 		cpu at 0 {
-- 
1.7.4.1