[PATCH 1/6] at_hdmac: move to generic DMA binding
Nicolas Ferre
nicolas.ferre at atmel.com
Thu Apr 18 06:59:42 EDT 2013
On 04/16/2013 03:03 PM, ludovic.desroches at atmel.com :
> From: Ludovic Desroches <ludovic.desroches at atmel.com>
>
> Update at_hdmac driver to support generic DMA device tree binding. Devices
> can still request channel with dma_request_channel() then it doesn't break
> DMA for non DT boards.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches at atmel.com>
> Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
I plan to make this whole series go forward for 3.10 because of the
sensitive nature of DMA bindings and the expectations of everybody on
this topic ;-)
Arnd,
Do you feel like giving your "Acked-by" to this patch? I think that you
were pretty in line with Ludovic's RFC, so it may be interesting to have
your support on this...
Vinod,
This series touches several sub-systems, I plan to split it so everyone
can take its corresponding code. Does it seem sensible to send you this
patch alone, extracted from this series, when it is ready?
Thanks, best regards.
> ---
> .../devicetree/bindings/dma/atmel-dma.txt | 35 ++++++--
> drivers/dma/at_hdmac.c | 93 ++++++++++++++++++++--
> drivers/dma/at_hdmac_regs.h | 4 +
> 3 files changed, 121 insertions(+), 11 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
> index 3c046ee..c80e8a3 100644
> --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
> @@ -1,14 +1,39 @@
> * Atmel Direct Memory Access Controller (DMA)
>
> Required properties:
> -- compatible: Should be "atmel,<chip>-dma"
> -- reg: Should contain DMA registers location and length
> -- interrupts: Should contain DMA interrupt
> +- compatible: Should be "atmel,<chip>-dma".
> +- reg: Should contain DMA registers location and length.
> +- interrupts: Should contain DMA interrupt.
> +- #dma-cells: Must be <2>, used to represent the number of integer cells in
> +the dmas property of client devices.
>
> -Examples:
> +Example:
>
> -dma at ffffec00 {
> +dma0: dma at ffffec00 {
> compatible = "atmel,at91sam9g45-dma";
> reg = <0xffffec00 0x200>;
> interrupts = <21>;
> + #dma-cells = <2>;
> +};
> +
> +DMA clients connected to the Atmel DMA controller must use the format
> +described in the dma.txt file, using a three-cell specifier for each channel:
> +a phandle plus two interger cells.
> +The three cells in order are:
> +
> +1. A phandle pointing to the DMA controller.
> +2. The memory interface (16 most significant bits), the peripheral interface
> +(16 less significant bits).
> +3. The peripheral identifier for the hardware handshaking interface. The
> +identifier can be different for tx and rx.
> +
> +Example:
> +
> +i2c0 at i2c@f8010000 {
> + compatible = "atmel,at91sam9x5-i2c";
> + reg = <0xf8010000 0x100>;
> + interrupts = <9 4 6>;
> + dmas = <&dma0 1 7>,
> + <&dma0 1 8>;
> + dma-names = "tx", "rx";
> };
> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
> index de4e930..2a63dbe 100644
> --- a/drivers/dma/at_hdmac.c
> +++ b/drivers/dma/at_hdmac.c
> @@ -24,6 +24,7 @@
> #include <linux/slab.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/of_dma.h>
>
> #include "at_hdmac_regs.h"
> #include "dmaengine.h"
> @@ -677,7 +678,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
> ctrlb |= ATC_DST_ADDR_MODE_FIXED
> | ATC_SRC_ADDR_MODE_INCR
> | ATC_FC_MEM2PER
> - | ATC_SIF(AT_DMA_MEM_IF) | ATC_DIF(AT_DMA_PER_IF);
> + | ATC_SIF(atchan->mem_if) | ATC_DIF(atchan->per_if);
> reg = sconfig->dst_addr;
> for_each_sg(sgl, sg, sg_len, i) {
> struct at_desc *desc;
> @@ -716,7 +717,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
> ctrlb |= ATC_DST_ADDR_MODE_INCR
> | ATC_SRC_ADDR_MODE_FIXED
> | ATC_FC_PER2MEM
> - | ATC_SIF(AT_DMA_PER_IF) | ATC_DIF(AT_DMA_MEM_IF);
> + | ATC_SIF(atchan->per_if) | ATC_DIF(atchan->mem_if);
>
> reg = sconfig->src_addr;
> for_each_sg(sgl, sg, sg_len, i) {
> @@ -822,8 +823,8 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
> desc->lli.ctrlb = ATC_DST_ADDR_MODE_FIXED
> | ATC_SRC_ADDR_MODE_INCR
> | ATC_FC_MEM2PER
> - | ATC_SIF(AT_DMA_MEM_IF)
> - | ATC_DIF(AT_DMA_PER_IF);
> + | ATC_SIF(atchan->mem_if)
> + | ATC_DIF(atchan->per_if);
> break;
>
> case DMA_DEV_TO_MEM:
> @@ -833,8 +834,8 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
> desc->lli.ctrlb = ATC_DST_ADDR_MODE_INCR
> | ATC_SRC_ADDR_MODE_FIXED
> | ATC_FC_PER2MEM
> - | ATC_SIF(AT_DMA_PER_IF)
> - | ATC_DIF(AT_DMA_MEM_IF);
> + | ATC_SIF(atchan->per_if)
> + | ATC_DIF(atchan->mem_if);
> break;
>
> default:
> @@ -1190,6 +1191,67 @@ static void atc_free_chan_resources(struct dma_chan *chan)
> dev_vdbg(chan2dev(chan), "free_chan_resources: done\n");
> }
>
> +static bool at_dma_filter(struct dma_chan *chan, void *slave)
> +{
> + struct at_dma_slave *atslave = slave;
> +
> + if (atslave->dma_dev == chan->device->dev) {
> + chan->private = atslave;
> + return true;
> + } else {
> + return false;
> + }
> +}
> +
> +#ifdef CONFIG_OF
> +static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec,
> + struct of_dma *of_dma)
> +{
> + struct dma_chan *chan;
> + struct at_dma_chan *atchan;
> + struct at_dma_slave *atslave;
> + dma_cap_mask_t mask;
> + unsigned int per_id;
> + struct platform_device *dmac_pdev;
> +
> + if (dma_spec->args_count != 2)
> + return NULL;
> +
> + dmac_pdev = of_find_device_by_node(dma_spec->np);
> +
> + dma_cap_zero(mask);
> + dma_cap_set(DMA_SLAVE, mask);
> +
> + atslave = devm_kzalloc(&dmac_pdev->dev, sizeof(*atslave), GFP_KERNEL);
> + if (!atslave)
> + return NULL;
> + /*
> + * We can fill both SRC_PER and DST_PER, one of these fields will be
> + * ignored depending on DMA transfer direction.
> + */
> + per_id = dma_spec->args[1];
> + atslave->cfg = ATC_FIFOCFG_HALFFIFO | ATC_DST_H2SEL_HW
> + | ATC_SRC_H2SEL_HW | ATC_DST_PER(per_id)
> + | ATC_SRC_PER(per_id);
> + atslave->dma_dev = &dmac_pdev->dev;
> +
> + chan = dma_request_channel(mask, at_dma_filter, atslave);
> + if (!chan)
> + return NULL;
> +
> + atchan = to_at_dma_chan(chan);
> + atchan->per_if = dma_spec->args[0] & 0xff;
> + atchan->mem_if = (dma_spec->args[0] >> 16) & 0xff;
> +
> + return chan;
> +}
> +#else
> +static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec,
> + struct of_dma *of_dma)
> +{
> + return NULL;
> +}
> +#endif
>
> /*-- Module Management -----------------------------------------------*/
>
> @@ -1344,6 +1406,8 @@ static int __init at_dma_probe(struct platform_device *pdev)
> for (i = 0; i < plat_dat->nr_channels; i++) {
> struct at_dma_chan *atchan = &atdma->chan[i];
>
> + atchan->mem_if = AT_DMA_MEM_IF;
> + atchan->per_if = AT_DMA_PER_IF;
> atchan->chan_common.device = &atdma->dma_common;
> dma_cookie_init(&atchan->chan_common);
> list_add_tail(&atchan->chan_common.device_node,
> @@ -1390,8 +1454,25 @@ static int __init at_dma_probe(struct platform_device *pdev)
>
> dma_async_device_register(&atdma->dma_common);
>
> + /*
> + * Do not return an error if the dmac node is not present in order to
> + * not break the existing way of requesting channel with
> + * dma_request_channel().
> + */
> + if (pdev->dev.of_node) {
> + err = of_dma_controller_register(pdev->dev.of_node,
> + at_dma_xlate, atdma);
> + if (err) {
> + dev_err(&pdev->dev, "could not register of_dma_controller\n");
> + goto err_of_dma_controller_register;
> + }
> + }
> +
> return 0;
>
> +err_of_dma_controller_register:
> + dma_async_device_unregister(&atdma->dma_common);
> + dma_pool_destroy(atdma->dma_desc_pool);
> err_pool_create:
> platform_set_drvdata(pdev, NULL);
> free_irq(platform_get_irq(pdev, 0), atdma);
> diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
> index 0eb3c13..c604d26 100644
> --- a/drivers/dma/at_hdmac_regs.h
> +++ b/drivers/dma/at_hdmac_regs.h
> @@ -220,6 +220,8 @@ enum atc_status {
> * @device: parent device
> * @ch_regs: memory mapped register base
> * @mask: channel index in a mask
> + * @per_if: peripheral interface
> + * @mem_if: memory interface
> * @status: transmit status information from irq/prep* functions
> * to tasklet (use atomic operations)
> * @tasklet: bottom half to finish transaction work
> @@ -238,6 +240,8 @@ struct at_dma_chan {
> struct at_dma *device;
> void __iomem *ch_regs;
> u8 mask;
> + u8 per_if;
> + u8 mem_if;
> unsigned long status;
> struct tasklet_struct tasklet;
> u32 save_cfg;
>
--
Nicolas Ferre
More information about the linux-arm-kernel
mailing list