[RFC 00/10] Versatile Express CLCD DVI output support
Pawel Moll
pawel.moll at arm.com
Wed Apr 17 11:17:12 EDT 2013
Hello All,
This series implements support for the Versatile Express
video output pipeline, which is not the simplest one available...
It is meant as a RFC only and I'm hoping to attract all possible
feedback (*including* naming ;-).
The VE's "MultiMedia Bus" [1] comprises three video signal sources
(motherboard's CLCD cell and a implementation-specific driver
on each of the daugtherboards) and a FPGA multiplexer routing
data from one of the sources to DVI/HDMI formatter chip (Sii9022).
+-----+
| DB1 |>--+ DVI connector
+-----+ | +------+ +--+
+-->| | |oo|
+-----+ | mux | +---------+ |oo|
| DB2 |>----->| |>-->| sii9022 |>-->|oo|
+-----+ | FPGA | +---------+ |oo|
+-->| | |oo|
+-----+ | +------+ +--+
| MB |>--+
+-----+
The series is based on Laurent Pinchart's Common Display Framework
patch (not in mainline yet, v2 discussed here: [2]) and extends it
by adding DT bindings and basic support for TFT panels.
The CLCD driver has been adapted to work with the framework and
the Device Tree information.
Also a set of drivers for the VE-specific components is included
(note that the sii9022 is now driven via the moterboard firmware;
this is intended to be replaced by a proper I2C driver for the
chip).
It is worth mentioning that the CDF caters for both fbdev and DRM
so the solution should be suitable for all potential DRM-driven
display controllers.
[1] http://infocenter.arm.com/help/topic/com.arm.doc.dui0447h/CHDEHEAA.html#CACGIGGC
[2] http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/57298
Laurent Pinchart (1):
video: Add generic display entity core
Pawel Moll (9):
video: display: Update the display with the video mode data
video: display: Add Device Tree bindings
video: display: Add generic TFT display type
fbmon: Add extra video helper
video: ARM CLCD: Add DT & CDF support
mfd: vexpress: Allow external drivers to parse site ids
video: Versatile Express MUXFPGA driver
video: Versatile Express DVI mode driver
ARM: vexpress: Add CLCD Device Tree properties
.../testing/sysfs-driver-video-vexpress-muxfpga | 5 +
.../devicetree/bindings/video/arm,pl11x.txt | 35 ++
.../devicetree/bindings/video/display-bindings.txt | 75 ++++
arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 17 +-
arch/arm/boot/dts/vexpress-v2m.dtsi | 17 +-
arch/arm/boot/dts/vexpress-v2p-ca9.dts | 5 +
drivers/mfd/vexpress-sysreg.c | 5 +
drivers/video/Kconfig | 2 +
drivers/video/Makefile | 5 +
drivers/video/amba-clcd.c | 244 +++++++++++
drivers/video/display/Kconfig | 4 +
drivers/video/display/Makefile | 1 +
drivers/video/display/display-core.c | 447 ++++++++++++++++++++
drivers/video/fbmon.c | 29 ++
drivers/video/vexpress-dvimode.c | 158 +++++++
drivers/video/vexpress-muxfpga.c | 228 ++++++++++
include/linux/amba/clcd.h | 2 +
include/linux/fb.h | 3 +
include/linux/vexpress.h | 2 +
include/video/display.h | 172 ++++++++
20 files changed, 1448 insertions(+), 8 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-driver-video-vexpress-muxfpga
create mode 100644 Documentation/devicetree/bindings/video/arm,pl11x.txt
create mode 100644 Documentation/devicetree/bindings/video/display-bindings.txt
create mode 100644 drivers/video/display/Kconfig
create mode 100644 drivers/video/display/Makefile
create mode 100644 drivers/video/display/display-core.c
create mode 100644 drivers/video/vexpress-dvimode.c
create mode 100644 drivers/video/vexpress-muxfpga.c
create mode 100644 include/video/display.h
--
1.7.10.4
More information about the linux-arm-kernel
mailing list