[PATCH 3/5] gpio/omap: Add DT support to GPIO driver
Javier Martinez Canillas
martinez.javier at gmail.com
Wed Apr 17 09:42:39 EDT 2013
On Wed, Apr 17, 2013 at 3:25 PM, Jon Hunter <jon-hunter at ti.com> wrote:
>
> On 04/17/2013 02:55 AM, Javier Martinez Canillas wrote:
>
> ...
>
>> There are so many patches flying around in this thread that I missed it :-)
>>
>> Sorry about that...
>
> No problem.
>
>>> I was trying to see if we could find a common solution that everyone
>>> could use as it seems that ideally we should all be requesting the gpio.
>>>
>>> Cheers
>>> Jon
>>>
>>> [1] http://marc.info/?l=linux-arm-kernel&m=136606204823845&w=1
>>
>> btw, I shared the latest patch with only build testing it, but today I
>> gave a try and I found a problem with this approach. The .xlate
>> function is being called twice for each GPIO-IRQ so the first time
>> gpio_request_one() succeeds but the second time it fails returning
>> -EBUSY.
>
> I tried it and I did not see that. I don't see the below warning either.
>
weird, I wonder what's different here.
I'll try tonight to test using another branch based on your
omap-daily-testing branch.
>> This raises a warning on drivers/of/platform.c
>> (WARN_ON(of_irq_to_resource_table(np, res, num_irq) != num_irq)):
>>
>> 0.285308] ------------[ cut here ]------------
>> [ 0.285369] WARNING: at drivers/of/platform.c:171
>> of_device_alloc+0x154/0x168()
>> [ 0.285430] Modules linked in:
>> [ 0.285491] [<c001a944>] (unwind_backtrace+0x0/0xf0) from
>> [<c0041edc>] (warn_slowpath_common+0x4c/0x68)
>> [ 0.285552] [<c0041edc>] (warn_slowpath_common+0x4c/0x68) from
>> [<c0041f14>] (warn_slowpath_null+0x1c/0x24)
>> [ 0.285614] [<c0041f14>] (warn_slowpath_null+0x1c/0x24) from
>> [<c041ac3c>] (of_device_alloc+0x154/0x168)
>> [ 0.285675] [<c041ac3c>] (of_device_alloc+0x154/0x168) from
>> [<c041ac84>] (of_platform_device_create_pdata+0x34/0x80)
>> [ 0.285736] [<c041ac84>]
>> (of_platform_device_create_pdata+0x34/0x80) from [<c0027364>]
>> (gpmc_probe_generic_child+0x180/0x240)
>> [ 0.285827] [<c0027364>] (gpmc_probe_generic_child+0x180/0x240)
>> from [<c00278d8>] (gpmc_probe+0x4b4/0x614)
>> [ 0.285888] [<c00278d8>] (gpmc_probe+0x4b4/0x614) from [<c0325514>]
>> (platform_drv_probe+0x18/0x1c)
>> [ 0.285949] [<c0325514>] (platform_drv_probe+0x18/0x1c) from
>> [<c0324354>] (driver_probe_device+0x108/0x21c)
>
> Any chance you have still have some additional code in your dts to
> request the gpio? I recall you made some hacks to make this work before.
>
Yes, but I remove all those hacks from my DT and gpmc driver. Is the
first thing I thought and I already doble checked that.
>> I probably won't have time to dig further on this until later this
>> week but I wanted to share with you in case you know why is being
>> calling twice and if you thought about a solution.
>
> Care to post your dts file?
>
I'm using the following patch to add smsc ethernet support to my board
+ adding 'ranges = <5 0 0x2c000000 0x1000000>;' to the gpmc device
node on omap3.dtsi:
>From 4fe26a40229e6e97c2ab3b80865c9f24e8ff3424 Mon Sep 17 00:00:00 2001
From: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
Date: Wed, 27 Feb 2013 02:59:29 +0100
Subject: [PATCH 2/2] ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support
The IGEPv2 board has an SMSC LAN9221i ethernet chip connected to
the OMAP3 processor though the General-Purpose Memory Controller.
This patch adds a device node for the ethernet chip as a GPMC child
and all its requirements (regulators, GPIO and pin muxs).
Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
---
arch/arm/boot/dts/omap3-igep.dtsi | 6 ++++
arch/arm/boot/dts/omap3-igep0020.dts | 52 ++++++++++++++++++++++++++++++++++
2 files changed, 58 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi
b/arch/arm/boot/dts/omap3-igep.dtsi
index f8fe3b7..d5cd504 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -62,6 +62,12 @@
0x126 0x0100 /* sdmmc1_dat7.sdmmc1_dat7 INPUT | MODE 0 */
>;
};
+
+ smsc911x_pins: pinmux_smsc911x_pins {
+ pinctrl-single,pins = <
+ 0x1a2 0x0104 /* mcspi1_cs2.gpio_176 INPUT | MODE4 */
+ >;
+ };
};
&i2c1 {
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts
b/arch/arm/boot/dts/omap3-igep0020.dts
index e2b9849..32a59df 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -40,6 +40,18 @@
gpios = <&twl_gpio 19 1>;
};
};
+
+ vddvario: regulator-vddvario {
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
+ };
+
+ vdd33a: regulator-vdd33a {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33a";
+ regulator-always-on;
+ };
};
&i2c3 {
@@ -54,3 +66,43 @@
reg = <0x50>;
};
};
+
+&gpmc {
+ ethernet at 5,0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc911x_pins>;
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ reg = <5 0 0xff>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <186>;
+ gpmc,cs-wr-off-ns = <186>;
+ gpmc,adv-on-ns = <12>;
+ gpmc,adv-rd-off-ns = <48>;
+ gpmc,adv-wr-off-ns = <48>;
+ gpmc,oe-on-ns = <54>;
+ gpmc,oe-off-ns = <168>;
+ gpmc,we-on-ns = <54>;
+ gpmc,we-off-ns = <168>;
+ gpmc,rd-cycle-ns = <186>;
+ gpmc,wr-cycle-ns = <186>;
+ gpmc,access-ns = <114>;
+ gpmc,page-burst-access-ns = <6>;
+ gpmc,bus-turnaround-ns = <12>;
+ gpmc,cycle2cycle-delay-ns = <18>;
+ gpmc,wr-data-mux-bus-ns = <90>;
+ gpmc,wr-access-ns = <186>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 8>;
+ vmmc-supply = <&vddvario>;
+ vmmc_aux-supply = <&vdd33a>;
+ reg-io-width = <4>;
+
+ smsc,save-mac-address;
+ };
+};
--
1.7.7.6
>> It works if I don't check the return gpio_request_one() (or better if
>> we don't return on omap_gpio_irq_domain_xlate) but of course is not
>> the right solution.
>
> Yes we need to check the return value.
>
I know, I was just pointing out that the fact that gpio_request_one()
was failing is what propagates the error to drivers/of/platform.c
> Cheers
> Jon
Thanks a lot and best regards,
Javier
More information about the linux-arm-kernel
mailing list