[PATCH 0/4] ARM: davinci: fix UART clock enabling

Manjunathappa, Prakash prakash.pm at ti.com
Wed Apr 17 02:32:46 EDT 2013


Hi Sekhar,

On Tue, Apr 09, 2013 at 17:57:57, Manjunathappa, Prakash wrote:
> Patch series addresses below issues:
> 1) Do clk_get on dev_id when there is single clock for a module
> 2) Fix garbled UART log with DT kernel on da850-evm.
> 

Could you please accept this series if you do not have review comments?

Thanks,
Prakash

> Applies on top of v3.9-rc9 of Linus's.
> Tested on da850-evm. Able to see proper bootup log and console on UART2.
> 
> Manjunathappa, Prakash (4):
>   ARM: davinci: uart: move to devid based clk_get
>   ARM: davinci: da850: override device name of UART in DT kernel
>   ARM: davinci: da850: do not specify clock_frequency for UART DT node
>   ARM: davinci: da8xx: remove da8xx_uart_clk_enable
> 
>  arch/arm/boot/dts/da850.dtsi                   |    3 -
>  arch/arm/mach-davinci/da830.c                  |    8 ++--
>  arch/arm/mach-davinci/da850.c                  |    8 ++--
>  arch/arm/mach-davinci/da8xx-dt.c               |   11 +----
>  arch/arm/mach-davinci/devices-da8xx.c          |   40 ++++++++++++++++---
>  arch/arm/mach-davinci/devices-tnetv107x.c      |   35 ++++++++++++++---
>  arch/arm/mach-davinci/dm355.c                  |   48 ++++++++++++++++++-----
>  arch/arm/mach-davinci/dm365.c                  |   35 ++++++++++++----
>  arch/arm/mach-davinci/dm644x.c                 |   48 ++++++++++++++++++-----
>  arch/arm/mach-davinci/dm646x.c                 |   49 +++++++++++++++++++-----
>  arch/arm/mach-davinci/include/mach/da8xx.h     |    2 +-
>  arch/arm/mach-davinci/include/mach/tnetv107x.h |    2 +-
>  arch/arm/mach-davinci/serial.c                 |   19 ++++++---
>  arch/arm/mach-davinci/tnetv107x.c              |    8 ++--
>  14 files changed, 233 insertions(+), 83 deletions(-)
> 
> --
> 1.7.4.1
> 
> 




More information about the linux-arm-kernel mailing list