[V9 PATCH 00/12] mv-usb phy driver

[Chao Xie]

On Wed, Apr 17, 2013 at 9:17 AM, Chao Xie <xiechao.mail at gmail.com> wrote:
>
> On Sun, Apr 7, 2013 at 6:29 PM, Chao Xie <chao.xie at marvell.com> wrote:
>>
>> The patches create the mv-usb phy driver
>>
>>
>>   directly use devm_usb_get_phy_dev return value for error return.
>>
>> v9->v8
>>   Remove u2o_xxx.
>>   Add prefix for register definition
>>   Move mutex to common PHY layer
>>   Use module_platform_driver() to register driver
>>   Use usleep_range to replace udelay
>>
>> Chao Xie (12):
>>   usb: phy: protect phy init and shutdown for mutiple deivces
>>   usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
>>   usb: gadget: mv_udc: use PHY driver for udc
>>   usb: ehci: ehci-mv: use PHY driver for ehci
>>   usb: phy: phy-mv-usb: use USB2 PHY driver for otg
>>   usb: mv_u3d: usb phy drivers for phy operation
>>   arm: mmp2: change the defintion of usb devices
>>   arm: pxa910: change the defintion of usb devices
>>   arm: ttc_dkb: modify usb support
>>   arm: mmp: remove unused usb devices
>>   arm: brownstone: add usb support for the board
>>   usb: mv_usb: remove the phy callbacks in pdata
>>
>>  arch/arm/mach-mmp/brownstone.c          |   56 +++++
>>  arch/arm/mach-mmp/include/mach/mmp2.h   |    4 +
>>  arch/arm/mach-mmp/include/mach/pxa910.h |    7 +-
>>  arch/arm/mach-mmp/mmp2.c                |    4 +
>>  arch/arm/mach-mmp/pxa910.c              |    4 +
>>  arch/arm/mach-mmp/ttc_dkb.c             |   39 +++-
>>  drivers/usb/gadget/mv_u3d.h             |    3 +-
>>  drivers/usb/gadget/mv_u3d_core.c        |   54 ++---
>>  drivers/usb/gadget/mv_udc.h             |    2 +-
>>  drivers/usb/gadget/mv_udc_core.c        |   50 ++---
>>  drivers/usb/host/ehci-mv.c              |   49 ++---
>>  drivers/usb/phy/Kconfig                 |    6 +
>>  drivers/usb/phy/Makefile                |    1 +
>>  drivers/usb/phy/phy-mv-usb.c            |   53 ++---
>>  drivers/usb/phy/phy-mv-usb.h            |    2 +-
>>  drivers/usb/phy/phy-mv-usb2.c           |  380
>> +++++++++++++++++++++++++++++++
>>  drivers/usb/phy/phy.c                   |    6 +
>>  include/linux/platform_data/mv_usb.h    |    3 -
>>  include/linux/usb/mv_usb2.h             |   29 +++
>>  include/linux/usb/phy.h                 |   22 ++-
>>  20 files changed, 624 insertions(+), 150 deletions(-)
>>  create mode 100644 drivers/usb/phy/phy-mv-usb2.c
>>  create mode 100644 include/linux/usb/mv_usb2.h
>>
>> --
>> 1.7.4.1
>>
>>
>
hi, balbi
You have given many valuable comments and suggestions for previous version.
So i modified the driver based on your review feedback. Can you help to
review the new version? Thanks.