[PATCH 2/3] i2c: at91: convert to dma_request_slave_channel_compat()
ludovic.desroches at atmel.com
ludovic.desroches at atmel.com
Mon Apr 15 08:16:56 EDT 2013
From: Ludovic Desroches <ludovic.desroches at atmel.com>
Use generic DMA DT helper. Platforms booting with or without DT populated are
both supported.
Signed-off-by: Ludovic Desroches <ludovic.desroches at atmel.com>
---
drivers/i2c/busses/i2c-at91.c | 49 ++++++++++++++++++++++---------------------
1 file changed, 25 insertions(+), 24 deletions(-)
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 75195e3..7ffd544 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -607,11 +607,16 @@ MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids);
#define atmel_twi_dt_ids NULL
#endif
-static bool filter(struct dma_chan *chan, void *slave)
+static bool filter(struct dma_chan *chan, void *pdata)
{
- struct at_dma_slave *sl = slave;
+ struct at91_twi_pdata *sl_pdata = pdata;
+ struct at_dma_slave *sl;
- if (sl->dma_dev == chan->device->dev) {
+ if (!sl_pdata)
+ return false;
+
+ sl = &sl_pdata->dma_slave;
+ if (sl && (sl->dma_dev == chan->device->dev)) {
chan->private = sl;
return true;
} else {
@@ -622,11 +627,10 @@ static bool filter(struct dma_chan *chan, void *slave)
static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
{
int ret = 0;
- struct at_dma_slave *sdata;
+ struct at91_twi_pdata *pdata = dev->pdata;
struct dma_slave_config slave_config;
struct at91_twi_dma *dma = &dev->dma;
-
- sdata = &dev->pdata->dma_slave;
+ dma_cap_mask_t mask;
memset(&slave_config, 0, sizeof(slave_config));
slave_config.src_addr = (dma_addr_t)phy_addr + AT91_TWI_RHR;
@@ -637,25 +641,22 @@ static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
slave_config.dst_maxburst = 1;
slave_config.device_fc = false;
- if (sdata && sdata->dma_dev) {
- dma_cap_mask_t mask;
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma->chan_tx = dma_request_channel(mask, filter, sdata);
- if (!dma->chan_tx) {
- dev_err(dev->dev, "no DMA channel available for tx\n");
- ret = -EBUSY;
- goto error;
- }
- dma->chan_rx = dma_request_channel(mask, filter, sdata);
- if (!dma->chan_rx) {
- dev_err(dev->dev, "no DMA channel available for rx\n");
- ret = -EBUSY;
- goto error;
- }
- } else {
- ret = -EINVAL;
+ dma->chan_tx = dma_request_slave_channel_compat(mask, filter, pdata,
+ dev->dev, "tx");
+ if (!dma->chan_tx) {
+ dev_err(dev->dev, "can't get a DMA channel for tx\n");
+ ret = -EBUSY;
+ goto error;
+ }
+
+ dma->chan_rx = dma_request_slave_channel_compat(mask, filter, pdata,
+ dev->dev, "rx");
+ if (!dma->chan_rx) {
+ dev_err(dev->dev, "can't get a DMA channel for rx\n");
+ ret = -EBUSY;
goto error;
}
--
1.7.11.3
More information about the linux-arm-kernel
mailing list