[PATCH 3/7] ARM: exynos: add missing properties for combiner IRQs

[Arnd Bergmann]

On Monday 15 April 2013, Thomas Abraham wrote:
> On 12 April 2013 19:33, Arnd Bergmann <arnd at arndb.de> wrote:
> > The exynos combiner irqchip needs to find the parent interrupts
> > and needs to know their number, so add the missing properties
> > for exynos4 as they were already present for exynos5.
> >
> > Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> > ---
> >  arch/arm/boot/dts/exynos4210.dtsi | 1 +
> >  arch/arm/boot/dts/exynos4212.dtsi | 9 +++++++++
> >  arch/arm/boot/dts/exynos4412.dtsi | 9 +++++++++
> >  3 files changed, 19 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
> > index 15143bd..c102869 100644
> > --- a/arch/arm/boot/dts/exynos4210.dtsi
> > +++ b/arch/arm/boot/dts/exynos4210.dtsi
> > @@ -41,6 +41,7 @@
> >         };
> >
> >         combiner:interrupt-controller at 10440000 {
> > +               combiner-nr = <16>;
> 
> The default value of the combiner-nr is case it is not specified is
> 16. The default value is documented in the bindings documentation.

Unfortunately, the driver now warns about a missing attribute, which
seems right. I also made the default "20" instead of "16" to cover the
other exynos4 chips. I'd say it's best to keep this one explicitly listed
even if it's optional.

> > +       interrupt-controller at 10440000 {
> > +               combiner-nr = <20>;
> > +               interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> > +                            <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
> > +                            <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> > +                            <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
> > +                            <0 107 0>, <0 108 0>>, <0 48 0>, <0 42 0>;
> 
> Extra '>' for <0 108 0> can be removed.
> 
> Reviewed-by: Thomas Abraham <thomas.abraham at linaro.org?

Thanks!