[PATCH v2 3/4] ARM: shmobile: BOCK-W: add USB support

[Sergei Shtylyov]

Register the USB PHY device from bockw_init(), passing the platform  data to it.
Set machine's init_late() method to r8a7778_init_late() in order for [EO]HCI to
get registered too...

The patch has been tested on the BOCK-W board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>

---
Changes since the original posting:
- removed initializer for no longer existing field in 'usb_phy_platform_data',
  modified the comment to the 'ferrite_bead' field initializer.

 arch/arm/mach-shmobile/board-bockw.c |    6 ++++++
 1 file changed, 6 insertions(+)

Index: renesas/arch/arm/mach-shmobile/board-bockw.c
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/board-bockw.c
+++ renesas/arch/arm/mach-shmobile/board-bockw.c
@@ -53,6 +53,10 @@ static struct resource smsc911x_resource
 	DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
 };
 
+static struct rcar_phy_platform_data usb_phy_platform_data = {
+	.ferrite_bead	= true,		/* not sure about this... */
+};
+
 #define IRQ0MR	0x30
 static void __init bockw_init(void)
 {
@@ -61,6 +65,7 @@ static void __init bockw_init(void)
 	r8a7778_clock_init();
 	r8a7778_init_irq_extpin(1);
 	r8a7778_add_standard_devices();
+	r8a7778_add_usb_phy_device(&usb_phy_platform_data);
 
 	fpga = ioremap_nocache(0x18200000, SZ_1M);
 	if (fpga) {
@@ -97,4 +102,5 @@ DT_MACHINE_START(BOCKW_DT, "bockw")
 	.init_machine	= bockw_init,
 	.init_time	= shmobile_timer_init,
 	.dt_compat	= bockw_boards_compat_dt,
+	.init_late      = r8a7778_init_late,
 MACHINE_END